Activated carbon
Effect of activated carbon/in situ synthesized magnetite hybrid fillers on the microwave properties of natural rubber composites [Volume 2, Issue 10, 2017, Pages 621-628]
Adhesively bonded scarf joint
Research on thermal buckling behaviour of the adhesively bonded scarf joints for glass connections [Volume 2, Issue 8, 2017, Pages 510-513]
AFM
Comparative study of Co2MnSi structural and surface morphological thin films on Si/SiO2[Volume 2, Issue 2, 2017, Pages 76-79]
AFM
Self-assembling nano films on metal surface as corrosion inhibitors [Volume 2, Issue 9, 2017, Pages 596-601]
Ag2O
DC magnetron sputtering: Impact of partial O2 pressure on the characteristics of Ag2O films [Volume 2, Issue 9, 2017, Pages 593-595]
Al2O3
Preparation and characterization of nanoparticles mixed cutting fluids [Volume 2, Issue 7, 2017, Pages 458-462]
Al2TiO5 films
Annealing temperature influenced physical properties of Al2TiO5 thin films for MIS devices [Volume 2, Issue 3, 2017, Pages 189-193]
AlN thin films
Optical band-gap and associated Urbach energy tails in defected AlN thin films grown by ion beam sputter deposition: Effect of assisted ion energy [Volume 2, Issue 5, 2017, Pages 342-346]
AM350
Experience of various materials for design and manufacture of bellows for nuclear industry [Volume 2, Issue 3, 2017, Pages 156-161]
Annealing studies
Structural and electrical studies of thermally annealed tungsten nitride thin film [Volume 2, Issue 6, 2017, Pages 362-366]
Au nanoparticles
Change of optical responses of Au nanoparticles induced by high-energy Si ion-irradiations [Volume 2, Issue 9, 2017, Pages 564-569]
B
BaCeO3
Synthesis of nanosized BaCeO3 from oxalate precursor [Volume 2, Issue 11, 2017, Pages 729-733]
Band gap
Optical property and AC conductivity RF sputtered N-doped ZnO thin films [Volume 2, Issue 1, 2017, Pages 6-9]
Band gap
Structural and optical characterization of MnFe2O4 nanoparticles [Volume 2, Issue 2, 2017, Pages 93-96]
Band gap
Electronic levels of small molecules for organic solar cells: A computational study [Volume 2, Issue 5, 2017, Pages 294-298]
Band gap
Synthesis and characterizations of Mn doped alloyed ZnxCd1-xS nanocrystals [Volume 2, Issue 7, 2017, Pages 455-457]
Barley
Application of polyacrylamide grafted barley as promising drug formulating agents [Volume 2, Issue 5, 2017, Pages 329-336]
BDS
Dielectric and electrical properties of hexagonal BaTi0.5Co0.5O3 ceramic with NTC effect [Volume 2, Issue 11, 2017, Pages 680-681]
Bi2MoO6
Photocatalytic degradation of rhodamine B in water by visible light irradiated BMZ nanocomposite [Volume 2, Issue 2, 2017, Pages 107-112]
Bilayer graphene
Magnetism of bilayer graphene with vacancies [Volume 2, Issue 12, 2017, Pages 779-782]
Biodegradable
Group 4 hydroxides and their multimetallic assemblies for ring opening polymerization (ROMP) of rac-lactide without solvent [Volume 2, Issue 10, 2017, Pages 643-647]
Biodiesel
Sulphated zirconia, an efficient solid acid catalyst for transesterification of triglycerides [Volume 2, Issue 12, 2017, Pages 819-824]
Boron carbide
Effect of processing parameters on synthesis of nanostructured boron carbide [Volume 2, Issue 2, 2017, Pages 128-131]
BVS calculation
Synthesis and characterization of a nano Cu2 cluster [Volume 2, Issue 4, 2017, Pages 275-279]
C
Ca2+ binding
Effect of calcium chloride on rheological behavior of sodium alginate [Volume 2, Issue 10, 2017, Pages 629-633]
Capecitabine
Electrochemical sensing of anti-cancer drug (Capecitabine) by GC-MWCNT-PAMAM (G3)-AuNps electrode [Volume 2, Issue 3, 2017, Pages 176-183]
Carbon black
Amalgamation of nano carbon for the advancement of the performance in mechanical properties of the concrete: A cementitious material [Volume 2, Issue 11, 2017, Pages 711-715]
CBD
Synthesis and characterization of Mn composition effect on CdSe thin films [Volume 2, Issue 6, 2017, Pages 367-370]
CdS NCs
Green synthesis, structural characterization and application of cadmium sulfide nanocrystals with fluorescent dyes for solar enhancement [Volume 2, Issue 4, 2017, Pages 223-227]
Ceramic Fe2TeO6
Synthesis and structural re-investigation of Fe2TeO6 using synchrotron x-rays [Volume 2, Issue 8, 2017, Pages 532-533]
Charge plasma
Performance analysis of different material based dual electrode doping-less TFET [Volume 2, Issue 6, 2017, Pages 384-387]
Chemical synthesis
Synthesis and Optimization of low-cost and high efficient Zirconium-aluminium modified iron oxide nano adsorbent for fluoride removal from drinking water [Volume 2, Issue 11, 2017, Pages 716-724]
CO2 Hydrogenation
Selective CO2 hydrogenation reaction using recyclable TiO2 supported Ruthenium nanoparticles [Volume 2, Issue 7, 2017, Pages 420-424]
Co2MnSi
Comparative study of Co2MnSi structural and surface morphological thin films on Si/SiO2[Volume 2, Issue 2, 2017, Pages 76-79]
Cobalt ferrite
Effect of Mn substitution on structural and magnetic properties of cobalt ferrite [Volume 2, Issue 9, 2017, Pages 547-551]
Composite materials
Synthesis and characterization of (Ba,Ca)TiO3 - (Ni,Co,Zn)Fe2O4 multiferroic particulate composite [Volume 2, Issue 4, 2017, Pages 242-246]
Concentration
Structural, optical and electrical properties of copper oxide nanoparticles prepared through microwave assistance [Volume 2, Issue 6, 2017, Pages 371-377]
Concrete
Amalgamation of nano carbon for the advancement of the performance in mechanical properties of the concrete: A cementitious material [Volume 2, Issue 11, 2017, Pages 711-715]
Conducting polymer
In-situ chemical synthesis of PANI dodecyl-benzene sulfonic acid doped vanadium pentoxide: Optical and electrical properties [Volume 2, Issue 3, 2017, Pages 184-188]
Conducting polymer
Optical absorption and morphology of bio-intercalated polyaniline composites [Volume 2, Issue 7, 2017, Pages 436-439]
Copper
Thermo catalytic decomposition of methane over Cu - Al2O3 and 5 - 20wt% Ni - Cu - Al2O3 catalysts to produce hydrogen and carbon nanofibers [Volume 2, Issue 1, 2017, Pages 35-40]
Co-precipitation
Synthesis of nickel ferrite nanoparticles via chemical co-precipitation method [Volume 2, Issue 1, 2017, Pages 32-34]
Co-precipitation
Structural, optical and electrical properties of copper oxide nanoparticles prepared through microwave assistance [Volume 2, Issue 6, 2017, Pages 371-377]
Co-precipitation method
Structural and optical characterization of MnFe2O4 nanoparticles [Volume 2, Issue 2, 2017, Pages 93-96]
Corrosion inhibition
Self-assembling nano films on metal surface as corrosion inhibitors [Volume 2, Issue 9, 2017, Pages 596-601]
Crystal growth
Growth, structural, thermal and dielectric studies of a-glycine single crystals grown under the influence of potassium iodide for nonlinear optical applications [Volume 2, Issue 2, 2017, Pages 80-85]
C-S-H gel structure
Amalgamation of nano carbon for the advancement of the performance in mechanical properties of the concrete: A cementitious material [Volume 2, Issue 11, 2017, Pages 711-715]
CTOD fracture toughness
Effect of aluminum additions on microstructures and mechanical properties of Ti micro-alloyed steels containing Ni subjected to simulating HAZ thermal cycle [Volume 2, Issue 1, 2017, Pages 41-45]
Cu2O-HMs
Green synthesis of Cu2O hollow microspheres [Volume 2, Issue 2, 2017, Pages 132-138]
Cu-Al-Mn
Study of effect of Fe, Cr and Ti on the martensite phase formation in Cu-12.5 wt% Al-5wt % Mn SMA [Volume 2, Issue 1, 2017, Pages 22-25]
Cu-doped ZnO NPs
Use of tools of NLD in analysis and calibration of Cu-doped ZnO nanoparticles (NPs) for biological applications [Volume 2, Issue 1, 2017, Pages 26-31]
Cu(II) ions
Synthesis of ZnO nanoparticles and its application in adsorption [Volume 2, Issue 11, 2017, Pages 697-703]
CV
Synthesis and characterization of a nano Cu2 cluster [Volume 2, Issue 4, 2017, Pages 275-279]
D
D. carota
Green synthesis of Cu2O hollow microspheres [Volume 2, Issue 2, 2017, Pages 132-138]
DCM sputtering
DC magnetron sputtering: Impact of partial O2 pressure on the characteristics of Ag2O films [Volume 2, Issue 9, 2017, Pages 593-595]
Debye temperature
Modeling shape and size dependence of thermal expansion and Debye temperature of nanocrystals [Volume 2, Issue 2, 2017, Pages 72-75]
Density functional calculations
Electronic levels of small molecules for organic solar cells: A computational study [Volume 2, Issue 5, 2017, Pages 294-298]
DFT
Study of structural, elastic & thermal properties of DyMg alloy using the FP-LAPW method [Volume 2, Issue 10, 2017, Pages 634-638]
Dielectric constant
Comparative studies of the structural and electrical studies of conventional and microwave sintered Li0.35 Ni0.1Mn0.1Zn0.2Fe2.35O4 synthesized by the citrate precursor method [Volume 2, Issue 1, 2017, Pages 67-70]
Dielectric constant
Structural and electrical behaviour of sol-gel derived Li-Ni-Co ferrite/SiO2 nanocomposites [Volume 2, Issue 5, 2017, Pages 310-314]
Disease burden
In vitro disease burden analysis using green silver nanoparticles [Volume 2, Issue 2, 2017, Pages 113-116]
E
EBSD
Plasticity assessment based on Schmid factor in deformed 9Cr-1Mo steel [Volume 2, Issue 5, 2017, Pages 304-309]
Efficiency
Development of quasi solid state dye sensitized solar cells [Volume 2, Issue 6, 2017, Pages 388-392]
Efficiency
Structural and optical study of amorphous hydrogenated silicon nitride thin film as antireflection coating on solar cell [Volume 2, Issue 9, 2017, Pages 570-574]
Elastic moduli
Microwave synthesized zinc-boro-vanadate glasses: Structural elucidation by employing ultrasonic and MAS NMR studies [Volume 2, Issue 4, 2017, Pages 254-258]
Electro ceramic
Electrical characterization of perovskite nanocubes of Na0.5K0.5NbO3 at low temperature [Volume 2, Issue 4, 2017, Pages 269-274]
Electrochemistry
Simplify the resolve of AC parameters such as immittances, conductivity and dielectric by using the delay-time measurement [Volume 2, Issue 10, 2017, Pages 615-620]
Electroless
Synthesis and characterization of nickel coated exfoliated graphite for microwave absorber applications [Volume 2, Issue 1, 2017, Pages 2-5]
Electron microscopy
Microscopic and spectroscopic evaluation of SPS sintered aluminium-graphene (Al-Gr) nanocomposites [Volume 2, Issue 3, 2017, Pages 146-151]
Electron microscopy
Change of optical responses of Au nanoparticles induced by high-energy Si ion-irradiations [Volume 2, Issue 9, 2017, Pages 564-569]
Electroplating
Electroplating of FDM Parts: A comparison via two different routes [Volume 2, Issue 7, 2017, Pages 414-419]
EN24
Tribological characteristics of EN8 and EN24 steel against aluminium alloy 6061 under lubricated condition [Volume 2, Issue 7, 2017, Pages 445-449]
EN8
Tribological characteristics of EN8 and EN24 steel against aluminium alloy 6061 under lubricated condition [Volume 2, Issue 7, 2017, Pages 445-449]
Etching
Electroplating of FDM Parts: A comparison via two different routes [Volume 2, Issue 7, 2017, Pages 414-419]
EXAFS
Synthesis and structural re-investigation of Fe2TeO6 using synchrotron x-rays [Volume 2, Issue 8, 2017, Pages 532-533]
F
FDM
Electroplating of FDM Parts: A comparison via two different routes [Volume 2, Issue 7, 2017, Pages 414-419]
Ferrites
FT-IR study of Cu substituted Ni-Zn ferrites prepared by citrate precursor method [Volume 2, Issue 3, 2017, Pages 205-208]
Ferrites
Structural and electrical behaviour of sol-gel derived Li-Ni-Co ferrite/SiO2 nanocomposites [Volume 2, Issue 5, 2017, Pages 310-314]
FESEM
Fabrication of kesterite absorber films by spray pyrolysis: Effect of annealing temperature on the phase formation [Volume 2, Issue 1, 2017, Pages 46-50]
FESEM
Dielectric and electrical properties of hexagonal BaTi0.5Co0.5O3 ceramic with NTC effect [Volume 2, Issue 11, 2017, Pages 680-681]
Fly ash
Pneumatic conveying of Fly Ash: Bend Models investigation [Volume 2, Issue 8, 2017, Pages 526-531]
Friction
Tribological characteristics of EN8 and EN24 steel against aluminium alloy 6061 under lubricated condition [Volume 2, Issue 7, 2017, Pages 445-449]
FT-IR
FT-IR study of Cu substituted Ni-Zn ferrites prepared by citrate precursor method [Volume 2, Issue 3, 2017, Pages 205-208]
FT-IR
Optical absorption and morphology of bio-intercalated polyaniline composites [Volume 2, Issue 7, 2017, Pages 436-439]
FTIR
Growth, structural, thermal and dielectric studies of a-glycine single crystals grown under the influence of potassium iodide for nonlinear optical applications [Volume 2, Issue 2, 2017, Pages 80-85]
FTIR
Self-assembling nano films on metal surface as corrosion inhibitors [Volume 2, Issue 9, 2017, Pages 596-601]
G
Gelatin
Electrical and mechanical characterization of Gelatin/poly (aniline) composite films [Volume 2, Issue 5, 2017, Pages 337-341]
GFRP
Numerical investigation of low-velocity impact in symmetric and asymmetric GFRP laminate with and without pre-crack [Volume 2, Issue 3, 2017, Pages 152-155]
Gold nano particle (AuNPs)
A study on green reducing agents for gold nanoparticles [Volume 2, Issue 6, 2017, Pages 410-412]
Gold nanoparticles
Electrochemical sensing of anti-cancer drug (Capecitabine) by GC-MWCNT-PAMAM (G3)-AuNps electrode [Volume 2, Issue 3, 2017, Pages 176-183]
GO-PAA complex
Functionalization of polyallylamine on graphene oxide [Volume 2, Issue 3, 2017, Pages 209-212]
GO surface functionalization
Functionalization of polyallylamine on graphene oxide [Volume 2, Issue 3, 2017, Pages 209-212]
GQDs
Thermal effects for the doped graphene quantum dots: Cyclic voltammetry [Volume 2, Issue 3, 2017, Pages 171-175]
Graphene
Microscopic and spectroscopic evaluation of SPS sintered aluminium-graphene (Al-Gr) nanocomposites [Volume 2, Issue 3, 2017, Pages 146-151]
Graphene oxide (GO)
Functionalization of polyallylamine on graphene oxide [Volume 2, Issue 3, 2017, Pages 209-212]
H
HCl
Thermal effects for the doped graphene quantum dots: Cyclic voltammetry [Volume 2, Issue 3, 2017, Pages 171-175]
Heavy metals
Nanoscale zero-valent iron for aqueous lead removal [Volume 2, Issue 4, 2017, Pages 235-241]
Helmholtz coil
Design and simulation of Helmholtz coil and Maxwell coil for low cost and low magnetic field MRI machine [Volume 2, Issue 12, 2017, Pages 802-806]
Hemolysis
Synthesis, characterization and biological applications of biofunctional gold nanoparticles for systemic circulation and biological sustainability [Volume 2, Issue 9, 2017, Pages 535-546]
Heusler alloy
Comparative study of Co2MnSi structural and surface morphological thin films on Si/SiO2[Volume 2, Issue 2, 2017, Pages 76-79]
High strength steels
Effect of chemical composition on hardenability of high strength low-C steels [Volume 2, Issue 6, 2017, Pages 358-361]
HRTEM
Structural investigation of carbon morphology on Ni/cerium-zirconium oxide catalysts used for the biogas dry reforming reaction [Volume 2, Issue 12, 2017, Pages 807-812]
Hydrogen
Thermo catalytic decomposition of methane over Cu - Al2O3 and 5 - 20wt% Ni - Cu - Al2O3 catalysts to produce hydrogen and carbon nanofibers [Volume 2, Issue 1, 2017, Pages 35-40]
I
Impact
Numerical investigation of low-velocity impact in symmetric and asymmetric GFRP laminate with and without pre-crack [Volume 2, Issue 3, 2017, Pages 152-155]
Improper ferroelectricity
Suppression of ferroelectric polarization and hence room temperature multiferroicity of LuFeO3 on Cu and Mn doping [Volume 2, Issue 5, 2017, Pages 347-350]
Inconel 625
Experience of various materials for design and manufacture of bellows for nuclear industry [Volume 2, Issue 3, 2017, Pages 156-161]
Inconel 718
Experience of various materials for design and manufacture of bellows for nuclear industry [Volume 2, Issue 3, 2017, Pages 156-161]
Intrinsic viscosity
Effect of calcium chloride on rheological behavior of sodium alginate [Volume 2, Issue 10, 2017, Pages 629-633]
Ion beam sputter deposition
Optical band-gap and associated Urbach energy tails in defected AlN thin films grown by ion beam sputter deposition: Effect of assisted ion energy [Volume 2, Issue 5, 2017, Pages 342-346]
Iron disulphide
Effect of varying reactant precursors on synthesis of nanostructured Iron disulphide (FeS2) [Volume 2, Issue 2, 2017, Pages 117-118]
Iron (III) phosphate
Synthesis of highly dispersed FePO4 cathode material for rechargeable lithium battery [Volume 2, Issue 4, 2017, Pages 218-222]
Iron pyrite
Electrochemical deposition of p-type FeS2 thin films absorber layer for photovoltaic cell [Volume 2, Issue 8, 2017, Pages 521-525]
J
Jahn-Teller effect
FT-IR study of Cu substituted Ni-Zn ferrites prepared by citrate precursor method [Volume 2, Issue 3, 2017, Pages 205-208]
Laser ablation
Dependence of the size of copper nanoparticles on laser energy synthesized by pulsed laser ablation in liquid [Volume 2, Issue 4, 2017, Pages 264-268]
Layered double hydroxides
Synergistic effect of LDH on thermal and flame retardant properties of unsaturated polyester nano-composite containing TXP [Volume 2, Issue 5, 2017, Pages 351-356]
LS-DYNA
Numerical investigation of low-velocity impact in symmetric and asymmetric GFRP laminate with and without pre-crack [Volume 2, Issue 3, 2017, Pages 152-155]
M
Magnesium metallurgy
Critical assessment of strengthening mechanism of magnesium alloys: Review [Volume 2, Issue 11, 2017, Pages 734-744]
Manganese ferrite
Structural and optical characterization of MnFe2O4 nanoparticles [Volume 2, Issue 2, 2017, Pages 93-96]
Manganese ferrite
Synthesis and fabrication of MnFe2O4 spinel ferrite thin films using chemical approach: Structural, magnetic, optical and magneto-optical properties [Volume 2, Issue 3, 2017, Pages 198-204]
Material of construction of bellows
Experience of various materials for design and manufacture of bellows for nuclear industry [Volume 2, Issue 3, 2017, Pages 156-161]
Maxwell coil
Design and simulation of Helmholtz coil and Maxwell coil for low cost and low magnetic field MRI machine [Volume 2, Issue 12, 2017, Pages 802-806]
Micro-alloyed steel
Effect of aluminum additions on microstructures and mechanical properties of Ti micro-alloyed steels containing Ni subjected to simulating HAZ thermal cycle [Volume 2, Issue 1, 2017, Pages 41-45]
Microstructure
Effect of nanosilica on drying shrinkage and creep properties of cement concrete [Volume 2, Issue 1, 2017, Pages 56-60]
Microstructure
Analysis of the effect of interrupted quenching on microstructure of high carbon steels for forgings [Volume 2, Issue 12, 2017, Pages 799-801]
Microstructure
Effect of chemical composition on hardenability of high strength low-C steels [Volume 2, Issue 6, 2017, Pages 358-361]
Microstructure
Structural, optical and electrical properties of copper oxide nanoparticles prepared through microwave assistance [Volume 2, Issue 6, 2017, Pages 371-377]
MIS capacitor
Annealing temperature influenced physical properties of Al2TiO5 thin films for MIS devices [Volume 2, Issue 3, 2017, Pages 189-193]
Mixed materials
Production system and material efficiency challenges for large scale introduction of complex materials [Volume 2, Issue 8, 2017, Pages 492-499]
Mn3O4
Facile one step synthesis and gas sensing behavior of PANI/Mn3O4 nanocomposite [Volume 2, Issue 7, 2017, Pages 450-454]
MOKE
Synthesis and fabrication of MnFe2O4 spinel ferrite thin films using chemical approach: Structural, magnetic, optical and magneto-optical properties [Volume 2, Issue 3, 2017, Pages 198-204]
Molecular docking
Anticancer property of green material through computational approach [Volume 2, Issue 6, 2017, Pages 378-383]
MRI
Design and simulation of Helmholtz coil and Maxwell coil for low cost and low magnetic field MRI machine [Volume 2, Issue 12, 2017, Pages 802-806]
N
Na0.5K0.5NbO3 Pellet
Electrical characterization of perovskite nanocubes of Na0.5K0.5NbO3 at low temperature [Volume 2, Issue 4, 2017, Pages 269-274]
Nano- cenosphere
Effect of cenosphere on thermal conductivity of bamboo fibre reinforced composites [Volume 2, Issue 2, 2017, Pages 97-102]
Nanocomposite (Bi2MoZnO7)
Photocatalytic degradation of rhodamine B in water by visible light irradiated BMZ nanocomposite [Volume 2, Issue 2, 2017, Pages 107-112]
Nanodielectric
Role of doped ZnO nanoparticles as polymer chain segmental motion exciter in PVA-ZnO nanocomposites investigated by dielectric relaxation spectroscopy [Volume 2, Issue 5, 2017, Pages 315-324]
Nanofibers
H2 and CO gas sensor from SnO2/polyaniline composite nanofibers fabricated by electrospinning [Volume 2, Issue 1, 2017, Pages 61-66]
Nano graphene
An experimental study on cutting temperature and burr in milling of ferritic stainless steel under MQL using nano graphene reinforced cutting fluid [Volume 2, Issue 9, 2017, Pages 560-563]
Nano-indentation
Characterization of low alloy steel impregnated with WS2 using nano-indentation [Volume 2, Issue 3, 2017, Pages 140-145]
Nanomaterials
Modeling shape and size dependence of thermal expansion and Debye temperature of nanocrystals [Volume 2, Issue 2, 2017, Pages 72-75]
Nanoparticle
Synthesis of nickel ferrite nanoparticles via chemical co-precipitation method [Volume 2, Issue 1, 2017, Pages 32-34]
Nanoparticle
Modifications induced in the optical properties of starch by embedded Ag nanoparticles [Volume 2, Issue 10, 2017, Pages 662-666]
Nanoparticles
Effect of processing parameters on synthesis of nanostructured boron carbide [Volume 2, Issue 2, 2017, Pages 128-131]
Nanoparticles
Selective CO2 hydrogenation reaction using recyclable TiO2 supported Ruthenium nanoparticles [Volume 2, Issue 7, 2017, Pages 420-424]
Nanoparticles
The synthesis of silver, zinc oxide and titanium dioxide nanoparticles and their antimicrobial activity [Volume 2, Issue 8, 2017, Pages 479-489]
Nanoparticles
Effect of Mn substitution on structural and magnetic properties of cobalt ferrite [Volume 2, Issue 9, 2017, Pages 547-551]
Nano polyaniline
A new synthetic approach of nano-sized polyaniline cathode material for zinc-polyaniline rechargeable battery [Volume 2, Issue 6, 2017, Pages 402-406]
Nanosilica
Effect of nanosilica on drying shrinkage and creep properties of cement concrete [Volume 2, Issue 1, 2017, Pages 56-60]
Natural rubber
Effect of activated carbon/in situ synthesized magnetite hybrid fillers on the microwave properties of natural rubber composites [Volume 2, Issue 10, 2017, Pages 621-628]
Ni catalysts
Structural investigation of carbon morphology on Ni/cerium-zirconium oxide catalysts used for the biogas dry reforming reaction [Volume 2, Issue 12, 2017, Pages 807-812]
Ni ferrite
Electrical and structural properties of zinc substituted nickel ferrites synthesized by sol-gel technique [Volume 2, Issue 3, 2017, Pages 162-166]
NiO/YSZ
Gelling synthesis of NiO/YSZ nanocomposite powder for solid oxide fuel cells [Volume 2, Issue 12, 2017, Pages 813-818]
NMR
Growth, structural, thermal and dielectric studies of a-glycine single crystals grown under the influence of potassium iodide for nonlinear optical applications [Volume 2, Issue 2, 2017, Pages 80-85]
NTCDA
Plasmon resonance in photoactive P-N junction blend, spin coated from self-made low cost spin coating machine for plastic solar cell [Volume 2, Issue 5, 2017, Pages 325-328]
O
One dimensional photonic band gap
Tuning the emission of Poly (9,9-dioctylflorenyl-2,7-diyl) using one dimensional photonic band gap [Volume 2, Issue 3, 2017, Pages 194-197]
Optimization
A study on green reducing agents for gold nanoparticles [Volume 2, Issue 6, 2017, Pages 410-412]
Organo vermiculite
Synthesis and characterization of flame retardant vermiculite polystyrene composites [Volume 2, Issue 4, 2017, Pages 231-234]
Ozone treatment
Ozone delivery on food materials incorporating some bio-based processes: A succinct synopsis [Volume 2, Issue 8, 2017, Pages 469-478]
P
P3HT
Plasmon resonance in photoactive P-N junction blend, spin coated from self-made low cost spin coating machine for plastic solar cell [Volume 2, Issue 5, 2017, Pages 325-328]
PANI
Facile one step synthesis and gas sensing behavior of PANI/Mn3O4 nanocomposite [Volume 2, Issue 7, 2017, Pages 450-454]
Pb2+ removal
Nanoscale zero-valent iron for aqueous lead removal [Volume 2, Issue 4, 2017, Pages 235-241]
PCBM
Plasmon resonance in photoactive P-N junction blend, spin coated from self-made low cost spin coating machine for plastic solar cell [Volume 2, Issue 5, 2017, Pages 325-328]
PEO
PEO embedded planer optical waveguide sensor for unidentified soil character analysis [Volume 2, Issue 3, 2017, Pages 167-170]
Phase change material
Comparative assessment of thermal comfort with Insulation and phase change materials utilizations in building roofs and walls [Volume 2, Issue 6, 2017, Pages 393-397]
Phase transition
Optical mesophase textures and the enthalpy changes with temperature of a liquid crystal compound 9OBA [Volume 2, Issue 2, 2017, Pages 125-127]
Physical properties
Structural and physical analysis of borosilicate glasses with Pr3+ ions [Volume 2, Issue 2, 2017, Pages 119-124]
Physical properties
Synthesis and fabrication of MnFe2O4 spinel ferrite thin films using chemical approach: Structural, magnetic, optical and magneto-optical properties [Volume 2, Issue 3, 2017, Pages 198-204]
Plasma treatment
Interfacial shear strength enhancement of polymeric macro-fibers via plasma treatment [Volume 2, Issue 12, 2017, Pages 789-792]
Plasmon Resonance
Plasmon resonance in photoactive P-N junction blend, spin coated from self-made low cost spin coating machine for plastic solar cell [Volume 2, Issue 5, 2017, Pages 325-328]
Pneumatic conveying
Pneumatic conveying of Fly Ash: Bend Models investigation [Volume 2, Issue 8, 2017, Pages 526-531]
Polyallylamine (PAA)
Functionalization of polyallylamine on graphene oxide [Volume 2, Issue 3, 2017, Pages 209-212]
Poly (amidoamine)
Electrochemical sensing of anti-cancer drug (Capecitabine) by GC-MWCNT-PAMAM (G3)-AuNps electrode [Volume 2, Issue 3, 2017, Pages 176-183]
Poly(amidoamine) dendrimer
Quaternary ammonium poly(amidoamine) dendrimer stabilized gold and other metal nanoparticles for biosensor applications [Volume 2, Issue 4, 2017, Pages 247-253]
Polyaniline
In-situ chemical synthesis of PANI dodecyl-benzene sulfonic acid doped vanadium pentoxide: Optical and electrical properties [Volume 2, Issue 3, 2017, Pages 184-188]
Polyaniline
Structural and optical properties of polyaniline/nickel ferrite nanocomposites [Volume 2, Issue 7, 2017, Pages 463-467]
Polygonal ferrite
Plasticity assessment based on Schmid factor in deformed 9Cr-1Mo steel [Volume 2, Issue 5, 2017, Pages 304-309]
Polymer
Synergistic effect of LDH on thermal and flame retardant properties of unsaturated polyester nano-composite containing TXP [Volume 2, Issue 5, 2017, Pages 351-356]
Polymer nanocomposites
Nonlinear enhancement of the dielectric properties of PVA-Al2O3 nanocomposites [Volume 2, Issue 4, 2017, Pages 280-287]
Porphyrin tweezers
Synthesis of conformationally flexible porphyrin tweezers and their application in generation of singlet oxygen [Volume 2, Issue 9, 2017, Pages 602-607]
Powder injection molding
Binder systems for powder injection molding:A review [Volume 2, Issue 12, 2017, Pages 761-768]
Precursor
Synthesis of nanosized BaCeO3 from oxalate precursor [Volume 2, Issue 11, 2017, Pages 729-733]
Protein-protein interactions
Synthesis, characterization and biological applications of biofunctional gold nanoparticles for systemic circulation and biological sustainability [Volume 2, Issue 9, 2017, Pages 535-546]
Pseudomonas aeruginosa
The synthesis of silver, zinc oxide and titanium dioxide nanoparticles and their antimicrobial activity [Volume 2, Issue 8, 2017, Pages 479-489]
PS-OVMT composites
Synthesis and characterization of flame retardant vermiculite polystyrene composites [Volume 2, Issue 4, 2017, Pages 231-234]
PTFE-based gaskets
Creep and thermal ratcheting characterization of polytetrafluoroethylene-based gasket materials [Volume 2, Issue 10, 2017, Pages 609-614]
Pulp waste extract
Green synthesis of Cu2O hollow microspheres [Volume 2, Issue 2, 2017, Pages 132-138]
Rac-Lactide
Group 4 hydroxides and their multimetallic assemblies for ring opening polymerization (ROMP) of rac-lactide without solvent [Volume 2, Issue 10, 2017, Pages 643-647]
Raman
Fabrication of kesterite absorber films by spray pyrolysis: Effect of annealing temperature on the phase formation [Volume 2, Issue 1, 2017, Pages 46-50]
Raman
Thermal effects for the doped graphene quantum dots: Cyclic voltammetry [Volume 2, Issue 3, 2017, Pages 171-175]
Raman scattering
Sulfurization temperature dependent properties of tin mono-sulfide thin films [Volume 2, Issue 8, 2017, Pages 500-505]
Raman spectroscopy
Role of pH in the hydrothermal synthesis of phase pure alpha Bi2O3 nanoparticles and its structural characterization [Volume 2, Issue 1, 2017, Pages 51-55]
Raman spectroscopy
Microscopic and spectroscopic evaluation of SPS sintered aluminium-graphene (Al-Gr) nanocomposites [Volume 2, Issue 3, 2017, Pages 146-151]
Raman spectroscopy
Surface finish and subsurface damage distribution during diamond turning of silicon [Volume 2, Issue 7, 2017, Pages 433-435]
RBS
Change of optical responses of Au nanoparticles induced by high-energy Si ion-irradiations [Volume 2, Issue 9, 2017, Pages 564-569]
RF sputtering
Optical property and AC conductivity RF sputtered N-doped ZnO thin films [Volume 2, Issue 1, 2017, Pages 6-9]
RF sputtering
Comparative study of Co2MnSi structural and surface morphological thin films on Si/SiO2[Volume 2, Issue 2, 2017, Pages 76-79]
Rheological properties
Effect of calcium chloride on rheological behavior of sodium alginate [Volume 2, Issue 10, 2017, Pages 629-633]
S
Self assembling nanofilm
Self-assembling nano films on metal surface as corrosion inhibitors [Volume 2, Issue 9, 2017, Pages 596-601]
SEM
Structural and optical characterization of MnFe2O4 nanoparticles [Volume 2, Issue 2, 2017, Pages 93-96]
SEM
Electrical and structural properties of zinc substituted nickel ferrites synthesized by sol-gel technique [Volume 2, Issue 3, 2017, Pages 162-166]
SEM
Structural and electrical behaviour of sol-gel derived Li-Ni-Co ferrite/SiO2 nanocomposites [Volume 2, Issue 5, 2017, Pages 310-314]
SEM
Enhanced dynamic mechanical properties of kenaf epoxy composites [Volume 2, Issue 11, 2017, Pages 749-757]
SEM
Effect of Mn substitution on structural and magnetic properties of cobalt ferrite [Volume 2, Issue 9, 2017, Pages 547-551]
Si-containing arylacetylene resin
The synthesis and characterization of a heat-resistant Si-containing aryl ether arylacetylene resin [Volume 2, Issue 12, 2017, Pages 783-788]
Silicon
Single point diamond turning of silicon for flat X-rays mirrors [Volume 2, Issue 7, 2017, Pages 425-427]
Silver nano hybrid
Green synthesis of hybrid silver nano structures using Cassia occidentalis plant leaf broth and their characterization [Volume 2, Issue 10, 2017, Pages 639-642]
SiO2
Preparation and characterization of nanoparticles mixed cutting fluids [Volume 2, Issue 7, 2017, Pages 458-462]
SnS films
Sulfurization temperature dependent properties of tin mono-sulfide thin films [Volume 2, Issue 8, 2017, Pages 500-505]
Sodium Alginate
Effect of calcium chloride on rheological behavior of sodium alginate [Volume 2, Issue 10, 2017, Pages 629-633]
SOFC anode
Gelling synthesis of NiO/YSZ nanocomposite powder for solid oxide fuel cells [Volume 2, Issue 12, 2017, Pages 813-818]
Solar Cell
Structural and optical study of amorphous hydrogenated silicon nitride thin film as antireflection coating on solar cell [Volume 2, Issue 9, 2017, Pages 570-574]
Sol-gel processes
Process dependent thermoelectric transport properties of Ca3Co4O9[Volume 2, Issue 8, 2017, Pages 485-491]
Spray pyrolysis
Fabrication of kesterite absorber films by spray pyrolysis: Effect of annealing temperature on the phase formation [Volume 2, Issue 1, 2017, Pages 46-50]
SPS
Microscopic and spectroscopic evaluation of SPS sintered aluminium-graphene (Al-Gr) nanocomposites [Volume 2, Issue 3, 2017, Pages 146-151]
Staphylococcus aureus
The synthesis of silver, zinc oxide and titanium dioxide nanoparticles and their antimicrobial activity [Volume 2, Issue 8, 2017, Pages 479-489]
Steels
Analysis of the effect of interrupted quenching on microstructure of high carbon steels for forgings [Volume 2, Issue 12, 2017, Pages 799-801]
Strength
Investigation of novel sustainable concrete using optimization technique [Volume 2, Issue 2, 2017, Pages 86-92]
Structural
Rietveld refinement of barium substituted bismuth ferrite synthesized using sol-gel technique [Volume 2, Issue 6, 2017, Pages 407-409]
Subsurface damage
Surface finish and subsurface damage distribution during diamond turning of silicon [Volume 2, Issue 7, 2017, Pages 433-435]
Surface Roughness
Single point diamond turning of silicon for flat X-rays mirrors [Volume 2, Issue 7, 2017, Pages 425-427]
SXRD
Synthesis and structural re-investigation of Fe2TeO6 using synchrotron x-rays [Volume 2, Issue 8, 2017, Pages 532-533]
Symmetrical
Numerical investigation of low-velocity impact in symmetric and asymmetric GFRP laminate with and without pre-crack [Volume 2, Issue 3, 2017, Pages 152-155]
T
TACE
Anticancer property of green material through computational approach [Volume 2, Issue 6, 2017, Pages 378-383]
Taguchi
Investigation of novel sustainable concrete using optimization technique [Volume 2, Issue 2, 2017, Pages 86-92]
TD-DFT
Tuning optoelectronic properties of carbazole through substituent effect: TD-DFT investigation [Volume 2, Issue 9, 2017, Pages 552-559]
TEM
Effect of processing parameters on synthesis of nanostructured boron carbide [Volume 2, Issue 2, 2017, Pages 128-131]
TEM
Thermal effects for the doped graphene quantum dots: Cyclic voltammetry [Volume 2, Issue 3, 2017, Pages 171-175]
TEM
Structural and optical behavior of Y2O3 nanocrystallites synthesized by sol-gel technique [Volume 2, Issue 11, 2017, Pages 687-690]
TEM image
A new synthetic approach of nano-sized polyaniline cathode material for zinc-polyaniline rechargeable battery [Volume 2, Issue 6, 2017, Pages 402-406]
Thin films
Reduced substrate clamping effect and evidence of shape memory behavior in vertically aligned Ni-Mn-In nanorod arrays [Volume 2, Issue 1, 2017, Pages 10-15]
Thin films
Comparative study of Co2MnSi structural and surface morphological thin films on Si/SiO2[Volume 2, Issue 2, 2017, Pages 76-79]
Thin films
Synthesis and fabrication of MnFe2O4 spinel ferrite thin films using chemical approach: Structural, magnetic, optical and magneto-optical properties [Volume 2, Issue 3, 2017, Pages 198-204]
Thin films
Thickness mod ulated structural and photo-luminescence properties of magnetron sputtered nanocrystalline SiC ultrathin films [Volume 2, Issue 11, 2017, Pages 725-728]
Thin films
Design and fabrication of multilayer dichroic beam splitter [Volume 2, Issue 6, 2017, Pages 398-401]
Thin films
Paper based ZnO thin film UV light detector using graphite pencil based electrodes [Volume 2, Issue 7, 2017, Pages 428-432]
Ti and Al deoxidized
Effect of aluminum additions on microstructures and mechanical properties of Ti micro-alloyed steels containing Ni subjected to simulating HAZ thermal cycle [Volume 2, Issue 1, 2017, Pages 41-45]
TiO2
Preparation and characterization of nanoparticles mixed cutting fluids [Volume 2, Issue 7, 2017, Pages 458-462]
TNF-α
Anticancer property of green material through computational approach [Volume 2, Issue 6, 2017, Pages 378-383]
Topology
Tuning optoelectronic properties of carbazole through substituent effect: TD-DFT investigation [Volume 2, Issue 9, 2017, Pages 552-559]
Transesterification
Sulphated zirconia, an efficient solid acid catalyst for transesterification of triglycerides [Volume 2, Issue 12, 2017, Pages 819-824]
U
Urbach energy tail
Optical band-gap and associated Urbach energy tails in defected AlN thin films grown by ion beam sputter deposition: Effect of assisted ion energy [Volume 2, Issue 5, 2017, Pages 342-346]
Urbach’s energy
Structural and physical analysis of borosilicate glasses with Pr3+ ions [Volume 2, Issue 2, 2017, Pages 119-124]
Urbach’s energy
Modifications induced in the optical properties of starch by embedded Ag nanoparticles [Volume 2, Issue 10, 2017, Pages 662-666]
UV light
Paper based ZnO thin film UV light detector using graphite pencil based electrodes [Volume 2, Issue 7, 2017, Pages 428-432]
UV-Vis absorption
Optical absorption and morphology of bio-intercalated polyaniline composites [Volume 2, Issue 7, 2017, Pages 436-439]
UV/Vis spectrum
Tuning optoelectronic properties of carbazole through substituent effect: TD-DFT investigation [Volume 2, Issue 9, 2017, Pages 552-559]
V
V2O5
In-situ chemical synthesis of PANI dodecyl-benzene sulfonic acid doped vanadium pentoxide: Optical and electrical properties [Volume 2, Issue 3, 2017, Pages 184-188]
Vickers hardness
Microwave synthesized zinc-boro-vanadate glasses: Structural elucidation by employing ultrasonic and MAS NMR studies [Volume 2, Issue 4, 2017, Pages 254-258]
Vickers hardness
The study of microhardness of powder metallurgy fabricated Fe-Cu alloy using vickers indenter [Volume 2, Issue 4, 2017, Pages 259-263]
Viscosity
Preparation and characterization of nanoparticles mixed cutting fluids [Volume 2, Issue 7, 2017, Pages 458-462]
VLS mechanism
Evolution of the performance of SiNWs based electrochemical capacitor in ionic electrolyte [Volume 2, Issue 4, 2017, Pages 214-217]
VSM and ferroelectric properties
Dielectric and electrical properties of hexagonal BaTi0.5Co0.5O3 ceramic with NTC effect [Volume 2, Issue 11, 2017, Pages 680-681]
X
XPS
Annealing temperature influenced physical properties of Al2TiO5 thin films for MIS devices [Volume 2, Issue 3, 2017, Pages 189-193]
X-ray crystallography
Synthesis and characterization of a nano Cu2 cluster [Volume 2, Issue 4, 2017, Pages 275-279]
X-ray diffraction
Optical property and AC conductivity RF sputtered N-doped ZnO thin films [Volume 2, Issue 1, 2017, Pages 6-9]
X-ray diffraction
Reduced substrate clamping effect and evidence of shape memory behavior in vertically aligned Ni-Mn-In nanorod arrays [Volume 2, Issue 1, 2017, Pages 10-15]
X-ray diffraction
Study of effect of Fe, Cr and Ti on the martensite phase formation in Cu-12.5 wt% Al-5wt % Mn SMA [Volume 2, Issue 1, 2017, Pages 22-25]
X-ray diffraction
Role of pH in the hydrothermal synthesis of phase pure alpha Bi2O3 nanoparticles and its structural characterization [Volume 2, Issue 1, 2017, Pages 51-55]
X-ray diffraction
Growth, structural, thermal and dielectric studies of a-glycine single crystals grown under the influence of potassium iodide for nonlinear optical applications [Volume 2, Issue 2, 2017, Pages 80-85]
X-ray diffraction
Nonlinear enhancement of the dielectric properties of PVA-Al2O3 nanocomposites [Volume 2, Issue 4, 2017, Pages 280-287]
X-ray diffraction
Role of doped ZnO nanoparticles as polymer chain segmental motion exciter in PVA-ZnO nanocomposites investigated by dielectric relaxation spectroscopy [Volume 2, Issue 5, 2017, Pages 315-324]
X-ray diffraction
Structural and optical behavior of Y2O3 nanocrystallites synthesized by sol-gel technique [Volume 2, Issue 11, 2017, Pages 687-690]
X-ray diffraction
Effect of Mn substitution on structural and magnetic properties of cobalt ferrite [Volume 2, Issue 9, 2017, Pages 547-551]
X-ray photoelectron spectroscopy
Sulfurization temperature dependent properties of tin mono-sulfide thin films [Volume 2, Issue 8, 2017, Pages 500-505]
XRD
Use of tools of NLD in analysis and calibration of Cu-doped ZnO nanoparticles (NPs) for biological applications [Volume 2, Issue 1, 2017, Pages 26-31]
XRD
Fabrication of kesterite absorber films by spray pyrolysis: Effect of annealing temperature on the phase formation [Volume 2, Issue 1, 2017, Pages 46-50]
XRD
Comparative study of Co2MnSi structural and surface morphological thin films on Si/SiO2[Volume 2, Issue 2, 2017, Pages 76-79]
XRD
Structural and optical characterization of MnFe2O4 nanoparticles [Volume 2, Issue 2, 2017, Pages 93-96]
XRD
Electrical and structural properties of zinc substituted nickel ferrites synthesized by sol-gel technique [Volume 2, Issue 3, 2017, Pages 162-166]
XRD
Structural and electrical behaviour of sol-gel derived Li-Ni-Co ferrite/SiO2 nanocomposites [Volume 2, Issue 5, 2017, Pages 310-314]
XRD
Dielectric and electrical properties of hexagonal BaTi0.5Co0.5O3 ceramic with NTC effect [Volume 2, Issue 11, 2017, Pages 680-681]
XRD
Thickness mod ulated structural and photo-luminescence properties of magnetron sputtered nanocrystalline SiC ultrathin films [Volume 2, Issue 11, 2017, Pages 725-728]
XRD
Synthesis and characterization of Mn composition effect on CdSe thin films [Volume 2, Issue 6, 2017, Pages 367-370]
XRR
Thickness mod ulated structural and photo-luminescence properties of magnetron sputtered nanocrystalline SiC ultrathin films [Volume 2, Issue 11, 2017, Pages 725-728]
Y
Yttrium oxide
Structural and optical behavior of Y2O3 nanocrystallites synthesized by sol-gel technique [Volume 2, Issue 11, 2017, Pages 687-690]
ZnO
Paper based ZnO thin film UV light detector using graphite pencil based electrodes [Volume 2, Issue 7, 2017, Pages 428-432]
ZnO-CdS nanocomposite
Effect of annealing temperature on optical properties and dye absorbance capacity of ZnO-CdS nanocomposite [Volume 2, Issue 2, 2017, Pages 103-106]
ZnO thin films
Optical properties of post-annealed zinc oxide (ZnO) thin films synthesized by pulsed laser deposition (PLD) [Volume 2, Issue 9, 2017, Pages 581-586]
ZNP-FBC interaction
Interaction of zinc peroxide nanoparticle with fibroblast cell [Volume 2, Issue 7, 2017, Pages 440-444]
ZnS thin film
Effect of precursor concentration on zinc sulphide nanomaterial prepared by co-precipitation method [Volume 2, Issue 10, 2017, Pages 654-661]
ZOI
Use of tools of NLD in analysis and calibration of Cu-doped ZnO nanoparticles (NPs) for biological applications [Volume 2, Issue 1, 2017, Pages 26-31]
