Document Type : Research Article

Authors

1 School of Engineering, Gautam Buddha University, Greater Noida 201308, India

2 Polymer Composite Group, CSIR-Advanced Materials and Processes Research Institute (CSIR-AMPRI), Hoshangabad Road, Bhopal 462026, India

Abstract

Randomly distributed kenaf fibre with varying length (5-50mm) and weight fractions (25-40%) were used to reinforce epoxy resin to prepare environment friendly composites. Effect of fibre length with constant fibre loading on dynamic mechanical properties was studied and its effect on storage modulus, loss modulus and damping factor were investigated. Kenaf fibres were also subjected to alkali treatment to improve interaction with the epoxy resin. The mechanical properties of composites improved with the length and loading of fibres. Tensile strength, flexural strength and impact strength of composites at 40 wt% of fibre reinforcement improved by 46, 51 and 97% as compared to the composites containing 25 wt% of kenaf fibre. It was also observed that fibre folds developed during mixing became significant factor which limited the improvement in mechanical strength of kenaf epoxy composites. A few important predictive models namely rule of mixture, Haplin-Tsai, Nielson Chen and Manera models were compared with the experimental values obtained in this present study. Manera model predicted the experimental data most accurately. Alkali treatment improved the interface and its outcome reflected in the improved modulus that increased 21.76% in samples having 10mm length of kenaf fibre. Copyright © 2017 VBRI Press.

Keywords

1.Edeerozey, A. M. M.; Akil, H. M.; Azhar, A. B.; Ariffin, M. I. Z.;
Chemical modification of kenaf fibers. Materials Letters,Mater
Lett.,2007, 61, 20235.

DOI:10.1016/j.matlet.2006.08.006

2.Zampaloni, M.; Pourboghrat, F.; Yankovich, S. A.; Rodgers, B. N.;
Moore, J.; Drzal, L. T.; Mohanty, A.K.; Misra, M., Kenaf natural
fiber reinforced polypropylene composites: a discussion on
manufacturing problems and solutions,Compos A Appl Sci Manuf.,
2007, 38, 156980.

DOI: 10.1016/j.compositesa.2007.01.001

3.Jiang, W.; Sun, L.; Hao, A. Chen, J. Y.;Regenerated cellulose
fibers from waste bagasse using ionic liquid. Textile Research
Journal,Text Res J.,2011, 81, 194958.

DOI: 10.1177/0040517511414974
 


Research Article 2017, 2(11), 749-757Advanced Materials Proceedings


Copyright © 2017 VBRI Press757


4.Pervaiz, M.; Sain, M. M.;Carbon storage potential in natural fiber
composites,Resour Conserv Recycl.,2003, 39, 32540.

DOI: 10.1016/S0921-3449(02)00173-8

5.Wang, J.; Ramaswamy, G. N.;One-step processing and bleaching
of Mechanically separated Kenaf fibers; effects on physical and
chemical properties,Text Res J., 2003, 73, 339-44.

DOI:
10.1177/004051750307300411
6.Nishino, T.; Hirao, K.; Kotera, M.; Nakamae, K.; Inagaki, H.;
Kenaf reinforced biodegradable composite,Compos Sci Technol.,
2003, 63, 1281-6.

DOI:
10.1016/S0266-3538(03)00099-X
7.Nosbi, N.; Akil, H. M.; Ishak, Z. A. M.; Abu Bakar, A.;
Degradation of compressive properties of pultured kenaf fibre
reinforced composites after immersion in various solutions,Mater
Des.,2010, 31, 4960-64.

DOI:
10.1016/j.matdes.2010.04.037
8.Abdullah, A. H.; Khalina, A.; Ali, A.;Effect of fiber volume
fraction on unidirectional Kenaf/epoxy composite: the transition
region, Polym Plast Technol Eng.,2011,50,1326-6.

DOI:
10.1080/03602559.2011.584239
9.Yousif, B. F.; Shalwan, A.; Chin, C. W.; Ming, K. C.;Flexural
properties of treated and untreated kenaf/epoxy composites,Mater
Des.,2012,40,378-85.

DOI:
10.1016/j.matdes.2012.04.017
10.Chin, C. W.; Yousif, B. F.;Potential of kenaf fibers as
reinforcement for tribological applications,Wear., 2009,267,
1500-57.

DOI:
10.1016/j.wear.2009.06.002
11.Hojo, T.; Xu, Z.; Yang, Y.; Hamada, H.;Tensile properties of
bamboo, Jute and kenaf mat-reinforced composite,Energy
procedia.,2014,56,72-79.

DOI:
10.1016/j.egypro.2014.07.133
12.Asumani, O. M. L.; Reid*, R. G.; Paskaramoorthy, R.;The effects
of alkali-silane treatment on the tensile and flexural properties of
short fiber non-woven reinforced polypropylene composites,
Compos Part A.,2012,43,1431-40.

DOI:
10.1016/j.compositesa.2012.04.007
13.Ochi, S.;Mechanical properties of kenaf fiber and kenaf/PLA
composites,Mech Mater.,2008,40,446-52.

DOI:
10.1016/j.mechmat.2007.10.006
14.
Fiore, V.; Di Bella, G.; Valenza, A.;The effect of alkaline
treatment on mechanical properties of kenaf fibers and their epoxy

composites,
Compos Part B.,2015,68 ,14-21.
DOI:
10.1016/j.compositesb.2014.08.025
15.Rezaei, F.; Yunus, R.; Ibrahim, N.A.;Effect of fiber length on
thermomechanical properties of short carbon fiber reinforced
polypropylene composites,Mater Des.,2009,30, 260-263.

DOI:
10.1016/j.matdes.2008.05.005
16.Sreekala, M. S.; George, J.; Kumaran, M. G.; Thomas,S.;The
mechanical performance of hybrid phenol-formaldehyde-based
composites reinforced with glass and oil palm fibres,Compos Sci
Technol.,2002,62 , 339-53.

DOI:
10.1016/S0266-3538(01)00219-6
17.Jawaid, M.; Abdul Khalil, H.P.S.; Hassan, A.; Dungani, R.;
Hadiyane, A.;Effect of jute fibre loading on tensile and dynamic
mechanical properties of oil palm epoxy composites,Compos Part
B.,2013,45,619-624.

DOI:
10.1016/j.compositesb.2012.04.068
18.Idicula, M.; Malhotra, S.K.; Joseph, K.; Thomas, S.;Dynamic
mechanical analysis of randomly oriented intimately mixed short
banana/sisal hybrid fibre reinforced polyester composites,Compos
Sci Technol.,2005,65,1077-1087.

DOI:
10.1016/j.compscitech.2004.10.023
19.Ferry, J. D.;Viscoelastic properties of polymers. 3rded. New York:
Wiley, 1980,p. 264.

20.Jones, R. M.;Mechanics of composite material. United States:
Hemisphere Publishing Corporation; 1975, p. 86.

21.Halpin, J. C.; Tsai, SW. AFML-TR-7-423 June 1969.

22.Halpin, J. C.; Kardos,J. L.;The Halpin-Tsai equations: A review,
Polym Eng Sci.,1976,16,34452.

DOI:
10.1002/pen.760160512
23.Bader, M.; Bowyer,W;An improved method of production for
high strength fibre-reinforced thermoplastics, Composites.,1973,
4,150-56.

DOI:
10.1016/0010-4361(73)90105-5
24.Manera,M.;Journal of Composite Materials.,1977,11,235-47.

DOI:
10.1177/00219983770110020