Document Type : Research Article

Authors

Mechanical, Engineering Department, Motilal Nehru National Institute of Technology Allahabad, Allahabad, 211004, India

Abstract

In present work, epoxy based glass composite is prepared using hand lay-up method followed by static compression with varying numbers of woven glass layers. Dynamic mechanical properties of prepared glass composites are studied in terms of storage modulus (E'), loss modulus (E''), damping (Tand) and glass transition temperature (Tg) as a function of temperature. The results indicated that value of E' and Tg increases whereas value of Tand decreases as increase in temperature. In addition, value of Tg obtained from Tand curve is found lower than that obtained from peak of E'' curve. The present glass composites are suitable for constructions, automobiles and aerospace industries due to its better dynamic mechanical properties and thermal stability. Copyright © 2017 VBRI Press.

Keywords

1.Velumani, S.; Navaneethakrishnan, P.; Jayabal, S.; Robinson
Smart D. S.; Bull;
Mater. Sci, 2013, 36, 575.
DOI:
10.1007/s12034-013-0524-6
2.
Husic, S.; Javni, I.; Petrovic, Z. S; Compos. Sci. Technol, 2005, 65,
19.

DOI:10.1016/j.compscitech.2004.05.020

3.
Chow, W.S; eXPRESS. Polym. Letters, 2007, 2, 104.
DOI:10.3144/expresspolymlett.2007.18

4.
Braga, R. A.; Magalhaes, Jr P. A. A; Mater. Sci. Eng, 2015, 56,
269.

DOI:10.1016/j.msec.2015.06.031 0928-4931

5.
Ramnath, B. V.; Kokan, S. J.; Raja, R. N.; Sathyanarayanan.;
Elanchezhian, C.; Prasad, A. R.; Manickavasagam, V. M;
Mater.
Des
, 2013, 51, 357.
DOI:10.1016/j.matdes.2013.03.102

6.Saba, N.; Jawaid, M.; Alothman, O.Y.; Paridah, M. T; Constr.
Build. Mater, 2016,106, 149.

DOI: 10.1016/ j.conbuildmat.2015.12.075

7.Saba, N.; Paridah, M. T.; Abdan , K.; Ibrahim, N. A; Const. Build.
Mate, 2016, 124, 133.

DOI:10.1016/j.conbuildmat.2016.07.059

8.Ridzuan, M. J. M.; Abdul Majid, M. S.; Afendi, M.; Mazlee,
M. N.; Gibson, A. G; Compos. Struct, 2016, 152, 850.

DOI:10.1016/j.compstruct.2016.06.026

9.
Gupta, M. K; Srivastava, R. K; Mater. Today: Proc, 2015, 2, 2909.
DOI:10.1016/j.matpr.2015.07.253

10.
Gupta, M. K; Proc IMechE Part L:J. Mater. Des. Appl, 2016,
DOI:
10.1177/1464420716646398
11.Saha, N.; Banergee, A. N.; Mitra, B. C; J. Appl. Polym. Sci, 1996,
60, 657.

DOI:
10.1002/(SICI)1097-4628(19960502)60:5<657::AID-
APP2>3.0.CO;2-P

12.
Rana, A. K.; Mitra, B. C.; Banerjee, A. N; J. Appl. Polym. Sci,
1999
, 71, 531.
DOI:
10.1002/(SICI)1097-4628(19990124)71:4<531::AID-
APP2>3.0.CO;2
-I
13.Ray, D.; Sarkar, B. K.; Das, S.; Rana, A. K;
Compos. Sci.
Technol
, 2002,62, 911.
DOI:10.1016/S0266-3538(02)00005-2

14.Nair, K. C. M.; Thomas, S.; Groeninckx, G;
Compos. Sci. Technol,
2001
, 61,2519.
DOI:
10.1016/S0266-3538(01)00170-1
15.Mohanty, S.; Verma, S. K.; Nayak, S. K; Compos. Sci. Technol,
2006, 66, 538.

DOI:10.1016/j.compscitech.2005.06.014

16.Shanmugam, D, M.; Thiruchitrambalam, M; Mater. Des, 2013, 50,
533.

DOI:10.1016/j.matdes.2013.03.048