Document Type : Review Article

Author

1 Department of Production Engineering, Faculty of Technology, Tomas Bata University in Zlin,Vavreckova 275, 762 72 Zlin, Czech Republic

2 Centre of Polymer Systems, University Institute, Tomas Bata University in Zlin,Trida T. Bati 5678, 760 01 Zlin, Czech Republic

Abstract

Regardless of high demands on properties of powder injection molding (PIM) compounds, there is still uncertainty in the role of the polymer binder in the process. To a great extent this is caused by the relatively low number of suitable direct methods to observe the interactions among binder components as well as binder-powder and binder-powder-processing tool reactions, because of the complexity of occurring interactions. In this paper the review of state-of-art in the field of binder development and characterization is reported with the special regard to methods to quantify their mutual relationship. Copyright © 2017 VBRI Press

Keywords

1.Williams, N. PIM Int. 2008,2,49.
2.Hausnerova, B.; Kuritka, I.; Bleyan, D. Molecules2014,19,2748.

3.German, R.M.; Bose, A.; Injection Moulding of Metals and
Ceramics; Metal Powder Industries Federation: USA, 1997.

4.Hausnerová, B.; Sáha, P.; Kubát, J. Int. Polym. Proc. 1999,14,
254.

5.Thomas-Vielma, P.;Cervera, A.; Levenfeld, B.; Várez,A.J. Eur.
Ceram. Soc.2008,28,763.

6.
Yang, W.W.; Hon, M. H. J. Eur. Ceram. Soc.2000,20,851.
7.Yang, W.W.; Yang, K.Y.; Wang, M.C.; Hon, M.H. Ceram. Int.
2003,29,745.

8.Chen, G.; Cao, P.; Wen, G.A.; Edmonds, N., Mater. Chem. Phys.
2013,139,557.

9.Sarizal, M.A.; Andanastuti, M.; Norhamidi, M.; Jaharah, A.G.
Ceram. Int.2014,40,2819.

10.Mutsuddy, B.C.; Ford, R. G.; Ceramic injection molding;Springer:
Germany, 1994.

11.
Cao, M. Y.; O'Connor, J. W.; Chung, C. I. Abstracts of Paper,
Powder Injection Molding Symposium,
1992.
12.Hens, K. F.; German, R. M. Adv. Powd. Metal. Particul. Mat.
1993,5,153.

13.Sidambe, A. T.; Figueroa, I.A.; Hamilton, H.G.C.; Todd, I. J. Mat.
Proc. Technol.2012,212,1591.

14.Hidalgo, J.; Abajo, C.; Jimenez Morales, A.; Torralba, J. M. J. Eur.
Ceram. Soc.2013,33,3185.

15.
Hausnerova, B.; Marcanikova, L.; Filip, P.; Saha, P. Polym. Eng.
Sci
2011,119,2925.
16.
Chung, C.I.; Rhee, B.O.; Cao, M.Y.; Liu, C.X. Adv. Powder Met.
1989,
1,67.
17.
Huang, M.S.; Hsu, H.C. J. Mater. Proc.Technol. 2009,209,5527.
18.
Bakan, H.I.; Jumadi, Y.; Messer, P.F.; Davies, H.A.; Ellis, B.
Powder Metall.
1998,41,289.
19.Anwar, M.Y.; Messer, P.F.; Ellis, B.; Davies, H.A. Powder Metall.
1995,38,113.

20.Newell, M.A.; Davies, H.A.; Messer, P.F.; Greensmith, D.J.,
Powder Metall. 2005,48,227.

21.
Omar, M.A.; Davies, H.A.; Messer, P.F.; Ellis, B. J. Mater.
Process. Technol.
2001,113,477.
22.Singh, A.K.; Mishra, R.K.; Prakash, R.; Maiti, P.; Singh, A.K.;
Pandey, D. Chem. Phys. Lett. 2010,486,32.

23.Tseng, W.J. Mater. Sci. Eng. A2000,289,116.

24.Chiou, Y.H.; Liu, S.J.; Lin, S.T. Ceram. Int. 1996, 22, 211.

25.Hausnerova, B.; Bleyan, D.; Kasparkova, V.; Pata, V.Ceram. Int.
2016,42,460.

26.
Li, Y.M.; Liu, X.Q.; Luo, F.H.; Yue, J.L. T. Nonferr. Metal. Soc.
2007,
17,1.
27.Chan, T.Y.; Lin, S.T. J. Am. Ceram. Soc. 1995,78,2746.

28.Ren, S.B.; He, X.B.; Qu, X.H.; Humail, I.S.; Wei, Y.P. J. Univ.
Sci. Technol. B 2008,15,297.

29.
Fan, J.L.; Han, Y.; Liu, T.; Cheng, H.C.; Gao, Y.; Tian, J.M. T.
Nonferr.
Metal. Soc. 2013,23,1709.
30.Hausnerova, B.; Saha, P.; Kubat, J.; Kitano, T.; Becker, J. J.
Polym. Eng. 2000,20,237.

31.Hsu, K.C.; Lo, G.M. Powder Metall. 1996,39,286.

32.Murray, J.; X-Stat 2.0: Statistical Experiment Design, Data
Analysis and Nonlinear Optimization; John Wiley&Sons: USA,
1992.

33.Ahn, S.; Park, S.J.; Lee, S.; Atre, S.V.; German, R.M. Powder
Technol. 2009,193,162.

34.Chen, F.; Wolcott, M.P. Eur. Polym. J. 2014,52,44.

35.Sudhakar, Y.N.; Selvakumar, M. e-Polymers 2012,12,1037

36.Doulabi, A.H.; Mirzadeh, H.; Imani, M. J. Appl. Polym. Sci. 2013,
127,3514.

37.
Hsu, K.C.; Lin, C.C.; Lo, G.M. Can. Metall. Quart. 1996,35,181.
38.
Yang, D.; Xu, Z.; Liu, C.; Wang, L.D. Colloid Surf. A 2010,367,
174.

39.
Michalski, M.C.; Hardy, J.; Saramago, B.J.V. J. Colloid Interf. Sci.
1998,
208,319.
40.Ucar, I.O.; Doganci, M.D.; Cansoy, C.E.; Erbil, H.Y.; Avramova,
I.; Suzer, S. Appl. Surf. Sci. 2011,257,9587.

41.
Kate, K.H.; Enneti, R.K.; Park, S.J.; German, R.M.; Atre, S.V.
Crit.
Rev. Solid State 2014,39,197.
42.Zheng, Z.S.; Qu, X.H. Powder Metall 2006,49,167.

43.Suri, P.; German, R.M.; de Souza, J.P.; Park, S.J. Powder Metall
2004,47,137.

44.Panayiotou, C. Polymer 2013,54,1621.

45.Coleman, M.M.; Graf, J.F.; Painter, P.C.; Specific Interactions and
the Miscibility of Polymer Blends -Practical Guides for Predicting
& Designing Miscible Polymer Mixtures; Technomic: USA, 1991.

46.Svoboda, P.; Kressler, J.; Ougizawa, T.; Inoue, T.; Ozutsumi, K.
Macromolecules 1997,30,1973.

47.French, R.N.; Machado, J.M.; Linvien, D. Polymer 1992,33,755.

48.Landry, C.J.T.; Teegarden, D.M. Macromolecules 1991,24,4310.

49.Brune, B.J.; Koehler, J.A.; Smith, P.J.; Payne, G.F. Langmuir
1999,15,3987.

50.Huang, H.; Hu,Y.; Zhang, J.M.; Sato, H.; Zhang, H.T.; Noda, I.;
Ozaki, Y. J. Phys. Chem. B 2005,109,19175.

51.Qin, C.; Pires, A.T.N.; Belfiore, L.A. Macromolecules 1991,24,
666.

52.Cruzramos, C.A.; Paul, D.R. Macromolecules 1989,22,1289.

53.Pfennig, J.L.G.; Keskkula, H.; Barlow, J.W.; Paul, D.R.
Macromolecules 1985,18,1937.

54.Brannock, G.R.; Barlow, J.W.; Paul, D.R. J. Polym. Sci. Polym.
Phys. 1990,28,871.

55.Rana, D.; Mandal, B.M.; Bhattacharyya, S.N. Polymer 1996,37,
2439.

56.Bernazzani, L.; Cardelli, C.; Conti, G.; Gianni, P. J. Therm. Anal.
Calorim. 2002,70,927.

57.Ziaee, S.; Paul, D.R. Abstr. Pap. Am. Chem. S.1996,212.

58.Bleyan, D.; Svoboda, P.; Hausnerova, B. Ceram. Int. 2015,41,
3975.

59.
Bleyan, D.; Hausnerova, B.; Svoboda, P. Powder Technol. 2015,
286,
84.
60.Mittal, K.L.; Anderson, H.R.; Fowkes, F.M.; Acid-Base
Interactions: Relevance to Adhesion Science and Technology; In
Honor of the 75th Birthday of Professor Frederick M. Fowkes.
VSP: Utrecht, 1991.

61.Drago, R.S.; Vogel, G.C.; Needham, T.E. J. Am. Chem Soc 1971,
93,6014.

62.Lanteri, B.; Burlet, H.; Poitou, A.; Campion, I. J. Mater. Sci. 1996,
31,1751.

63.Kwon, T.H.; Ahn, S.Y. Powder Technol. 1995,85,45.

64.Silberzahn, P.; Leger, L.
Comptes Rendus Acad. Sci. Serie II 1991,
312,
1089.
65.Schonhor, H; Frisch, H.L.; Kwei, T.K. J. Appl. Phys. 1966,37,
4967.

66.Pearson, J.R.A.; Petrie, C.J.S.; On the Melt Flow Instability of
Extruded Polymers, In Polymer systems, Deformation and Flow;
Wetton, R.E.; Whorlow, R.W. (Eds.); Macmillan: London, 1968.

67.
Jabbarzadeh, A.; Atkinson, J.D.; Tanner, R.I. J. Chem. Phys. 1999,
110,
2612.
68.
Hausnerova, B.; Kasparkova, V.; Hnatkova, E. Polym. Eng. Sci.
2017,
57,739.