Advanced Materials Proceedings

Current Issue

By Issue

By Author

By Subject

Author Index

Keyword Index

About Journal

Aims and Scope

Editorial Board

Publication Ethics

Indexing and Abstracting

Related Links

FAQ

Peer Review Process

News

Browse Author Index

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ALL

A

  • A. Al-horaibi, Sultan Symmetrical and unsymmetrical squaraine sensitizers for dye-sensitized solar cells: Present day advances and future challenges [Volume 3, Issue 4, 2018, Pages 274-283]

  • A. Cortés-Hernández, Dora Sol-gel synthesis of mixed ferrites for biomedical applications [Volume 3, Issue 6, 2018, Pages 400-403]

  • Aggarwal, Manu Micro-fibrillar fiber of bicomponent polymer blends: Traditional paradigm with modern approach [Volume 3, Issue 7, 2018, Pages 433-442]

  • Aggarwal, Sanjeev Ag nanoparticles induced modification in microhardness of polyvinyl alcohol [Volume 3, Issue 8, 2018, Pages 508-511]

  • Agrawal, Neha Micro-fibrillar fiber of bicomponent polymer blends: Traditional paradigm with modern approach [Volume 3, Issue 7, 2018, Pages 433-442]

  • A Guerra, Jorge Fabrication and luminescence properties in Yb –Tb co-doped a-SiCO thin films [Volume 3, Issue 6, 2018, Pages 372-376]

  • Ahmad Alvi, Parvez Analysis of optical gain characteristics of Type-I InGaAsN/GaAs (Dilute N) based lasing nano-heterostructure [Volume 3, Issue 9, 2018, Pages 558-561]

  • Akhtar, M. J. Impact of particle sizes on the microwave absorption properties of nano-sized Carbon black/epoxy composites [Volume 3, Issue 8, 2018, Pages 497-500]

  • Akhtar, M.J. Effect of silicon carbide nanoparticles on dielectric (2.45 GHz) and thermal properties of epoxy nanocomposites for microwave curing [Volume 3, Issue 3, 2018, Pages 170-174]

  • Al-Johani, Hind Optical and Thermal studies on CNT doped Liquid Crystal Mixtures [Volume 3, Issue 1, 2018, Pages 41-44]

  • A. Mansilla, Graciela Influence of electroplating stages on hydrogen pickup in SAE 1005 steel [Volume 3, Issue 5, 2018, Pages 356-360]

  • Antuzevičš, Andris Nanostructured carbon materials for hydrogen energetics [Volume 3, Issue 3, 2018, Pages 136-141]

  • Arzig, Matthias Optimization of the SiC powder source size distribution for the sublimation growth of long crystal boules [Volume 3, Issue 9, 2018, Pages 540-543]

  • A. Shelkar, Shubhangi Gamma radiolytic synthesis of poly(2, 3-Epoxy-propylmethacrylate)-stabilized-gold nanoparticles: an efficient catalyst for p-nitrophenol reduction [Volume 3, Issue 4, 2018, Pages 199-205]

  • Ashraf, Shifna A novel cage type, multifunctional catalyst from natural kaolin [Volume 3, Issue 2, 2018, Pages 82-84]

  • A Töfflinger, Jan Fabrication and luminescence properties in Yb –Tb co-doped a-SiCO thin films [Volume 3, Issue 6, 2018, Pages 372-376]

  • Avalos, Martina Deformation mechanisms that explain the combination of high plasticity and strength in steels wires with extreme carbon content [Volume 3, Issue 5, 2018, Pages 344-350]

  • Avalos, Martina Correlation between structural aspects and mechanical properties of an Interstitial Free steel for automotive application [Volume 3, Issue 6, 2018, Pages 408-413]

  • Avalos, Martina High deformation effects on the plasticity of ultra-high carbon steel wires [Volume 3, Issue 6, 2018, Pages 414-418]

  • A. Vieira, Manuel Photodetection of modulated light of white RGB LEDs with a-SiC:H device [Volume 3, Issue 5, 2018, Pages 366-371]

  • A. Vieira, Manuel Smart vehicle lighting system based on a-SiCH technology [Volume 3, Issue 9, 2018, Pages 544-549]

B

  • Bai, Jiaming A review of recent advances biomedical implants and their application [Volume 3, Issue 8, 2018, Pages 486-493]

  • Baijnath, . Synthesis and performance of La0.5Sr0.5CoO3 cathode for low and intermediate temperature solid oxide fuel cells [Volume 3, Issue 2, 2018, Pages 118-124]

  • Bakar Khan, Aboo Influence of back barrier layer thickness on device performance of AlGaN/GaN MOS-HEMT [Volume 3, Issue 7, 2018, Pages 480-484]

  • Bakar Khan, Aboo Analysis of optical gain characteristics of Type-I InGaAsN/GaAs (Dilute N) based lasing nano-heterostructure [Volume 3, Issue 9, 2018, Pages 558-561]

  • Balal Arain, Muhammad Fabrication of biocompatible nanocomposite consisted of zinc oxide nanoparticles based poly (Acrylonitrile-co-Acrylic acid) [Volume 3, Issue 6, 2018, Pages 425-431]

  • Bansal, Sumali Growth of GNTs with backbone Xn@Au6n(n=1,3,5,7,9) (X = Ag, Cu, Au) [Volume 3, Issue 3, 2018, Pages 175-177]

  • Basu, Suddhasatwa Synthesis and performance of La0.5Sr0.5CoO3 cathode for low and intermediate temperature solid oxide fuel cells [Volume 3, Issue 2, 2018, Pages 118-124]

  • Batentschuk, Miroslaw Fabrication and luminescence properties in Yb –Tb co-doped a-SiCO thin films [Volume 3, Issue 6, 2018, Pages 372-376]

  • Berzina, Astrida Nanostructured carbon materials for hydrogen energetics [Volume 3, Issue 3, 2018, Pages 136-141]

  • B. Gadkari, Ashok Synthesis and characterization study of dual phase mixed zinc cobalt ferrite nanoparticles prepared via chemical co-precipitation method [Volume 3, Issue 8, 2018, Pages 517-520]

  • Bhandari, Rajiv Growth of GNTs with backbone Xn@Au6n(n=1,3,5,7,9) (X = Ag, Cu, Au) [Volume 3, Issue 3, 2018, Pages 175-177]

  • Bharati, Rajani Green synthesis of ZnO/SiO2 nanocatalyst with palash leaves extract for treatment of petrochemical wastewater [Volume 3, Issue 1, 2018, Pages 31-35]

  • Bhargaw, H.N. Development of environment friendly electrical insulation from natural fibrils [Volume 3, Issue 4, 2018, Pages 218-229]

  • Bhingole, P P Scope, development, application of magnesium as bioresorable material [Volume 3, Issue 2, 2018, Pages 58-67]

  • Bhusan Khatua, Bhanu A review on the electrical and electrochemical behavior of composites based on carbon nanotube, graphene and their derivatives [Volume 3, Issue 4, 2018, Pages 230-273]

  • Bisaria, Himanshu Experimental study on performance characteristics of Ni-rich NiTi shape memory alloy in wire electric discharge machining (WEDM) [Volume 3, Issue 5, 2018, Pages 335-339]

  • Biswas, Sarajit Density functional study of metal to half-metal transition in the rutile vanadium dioxide VO2 [Volume 3, Issue 5, 2018, Pages 351-355]

  • Borah, S.M. Study of structural, optical and antibacterial properties of starch-capped Cu doped ZnO nanoparticles (NPs) [Volume 3, Issue 1, 2018, Pages 36-40]

  • B. Piste, Pravina Synthesis and characterization study of dual phase mixed zinc cobalt ferrite nanoparticles prepared via chemical co-precipitation method [Volume 3, Issue 8, 2018, Pages 517-520]

  • Brandaleze, Elena Deformation mechanisms that explain the combination of high plasticity and strength in steels wires with extreme carbon content [Volume 3, Issue 5, 2018, Pages 344-350]

  • Brandaleze, Elena Correlation between structural aspects and mechanical properties of an Interstitial Free steel for automotive application [Volume 3, Issue 6, 2018, Pages 408-413]

  • Brandaleze, Elena High deformation effects on the plasticity of ultra-high carbon steel wires [Volume 3, Issue 6, 2018, Pages 414-418]

  • B. Sarawade, Pradip Optical and Thermal studies on CNT doped Liquid Crystal Mixtures [Volume 3, Issue 1, 2018, Pages 41-44]

  • B. Vashistha, Indu Impact of thermal treatment parameter on the properties of Cu2ZnSnS4 solar absorber layer [Volume 3, Issue 1, 2018, Pages 13-16]

C

  • C. Angadi, Sudha Chitosan-magnesium aluminum silicate nanocomposite microspheres coated with poly(vinyl acetate phthalate) for controlled release of capecitabine [Volume 3, Issue 9, 2018, Pages 550-557]

  • C. Escobedo-Bocardo, José Sol-gel synthesis of mixed ferrites for biomedical applications [Volume 3, Issue 6, 2018, Pages 400-403]

  • Chaalal, Omar Green water flooding of fractured and heterogeneous oil reservoirs at high salinity and high temperature [Volume 3, Issue 6, 2018, Pages 386-391]

  • Chandak, Naveneet Ag nanoparticles induced modification in microhardness of polyvinyl alcohol [Volume 3, Issue 8, 2018, Pages 508-511]

  • Chandra, Ramesh Sputtered nanostructured single crystalline cu doped ZnO thin films for carbon monoxide gas sensing applications [Volume 3, Issue 5, 2018, Pages 312-317]

  • Chatterjee, Pinaki Effect of gamma irradiation on mechanical properties of poly (lactic) acid–luffa fiber composites [Volume 3, Issue 4, 2018, Pages 284-288]

  • Chattopadhyay, Sanatan Self-rectifying threshold resistive switching based non-volatile memory of CBD/CBD grown vertical n-ZnO nanowire/p-Si heterojunction diodes [Volume 3, Issue 4, 2018, Pages 298-303]

  • Cheol Lim, Weon ­­­Local electronic structure investigation of the sol-gel processed calcium hydroxide material [Volume 3, Issue 6, 2018, Pages 377-381]

  • C. Mehra, Navin Solvothermal synthesis of nanosized cobalt antimonide for thermoelectrics [Volume 3, Issue 2, 2018, Pages 99-102]

  • Costa, J. Photodetection of modulated light of white RGB LEDs with a-SiC:H device [Volume 3, Issue 5, 2018, Pages 366-371]

  • C. Sharma, Mahesh Impact of thermal treatment parameter on the properties of Cu2ZnSnS4 solar absorber layer [Volume 3, Issue 1, 2018, Pages 13-16]

D

  • Danish, Mohammad Band gap engineered Nb2O5 thin films fabricated from sol-gel processed modified precursors for enhanced photocatalytic activity: A comparative study [Volume 3, Issue 5, 2018, Pages 328-334]

  • Das, Avishek Self-rectifying threshold resistive switching based non-volatile memory of CBD/CBD grown vertical n-ZnO nanowire/p-Si heterojunction diodes [Volume 3, Issue 4, 2018, Pages 298-303]

  • Das, Sourav Impact toughness of closed cell aluminum foam [Volume 3, Issue 7, 2018, Pages 443-446]

  • Debanath, M.K. Study of structural, optical and antibacterial properties of starch-capped Cu doped ZnO nanoparticles (NPs) [Volume 3, Issue 1, 2018, Pages 36-40]

  • Devi, Lakhirupa A comparative study on NiO nanocrystal modified graphite and Au electrode matrices as immobilization supports for laccase enzyme in amperometric biosensing for catechol detection [Volume 3, Issue 5, 2018, Pages 304-311]

  • Dhaka, Manoj K Dielectric properties of epoxy based composites containing graphite, graphite oxide and thermally exfoliated graphene oxide [Volume 3, Issue 2, 2018, Pages 93-98]

  • Dharamvir, Keya Growth of GNTs with backbone Xn@Au6n(n=1,3,5,7,9) (X = Ag, Cu, Au) [Volume 3, Issue 3, 2018, Pages 175-177]

  • Dinda, Gargi Catalytic and antibacterial activity of copper nanoparticle-starch composite [Volume 3, Issue 1, 2018, Pages 2-7]

  • Di Schino, Andrea Analysis of the effect of boron addition on steels for forged components [Volume 3, Issue 8, 2018, Pages 494-496]

  • D. Tembhurkar, Yashwantrao Electrical properties of CuInTe2(1-x)S2x thin film by spray pyrolysis [Volume 3, Issue 2, 2018, Pages 125-128]

  • D.Thakre, Gananath Investigation of tribo-performance and rheological behavior of lubricants: influence of MoS2 nano-particles [Volume 3, Issue 3, 2018, Pages 164-169]

E

  • E. De-León-Prado, Laura Sol-gel synthesis of mixed ferrites for biomedical applications [Volume 3, Issue 6, 2018, Pages 400-403]

  • Emilio Di Nunzio, Paolo Analysis of the effect of boron addition on steels for forged components [Volume 3, Issue 8, 2018, Pages 494-496]

  • E. Mosuang, Thuto Structural and optical property changes of zin oxide nanopowders doped with cobalt and indium metals mechano-chemically [Volume 3, Issue 4, 2018, Pages 213-217]

  • Espino-Portillo, Joel Sol-gel synthesis of mixed ferrites for biomedical applications [Volume 3, Issue 6, 2018, Pages 400-403]

F

  • F Flores, Loreleyn Fabrication and luminescence properties in Yb –Tb co-doped a-SiCO thin films [Volume 3, Issue 6, 2018, Pages 372-376]

  • F. Manamela, Mahlatse Structural and optical property changes of zin oxide nanopowders doped with cobalt and indium metals mechano-chemically [Volume 3, Issue 4, 2018, Pages 213-217]

  • F. Osma, Johann Polymeric number average molecular weight in submicron films as a tool for the manipulation of water phenomena in translucent coatings [Volume 3, Issue 6, 2018, Pages 392-395]

G

  • Gaikwad, S.T. Symmetrical and unsymmetrical squaraine sensitizers for dye-sensitized solar cells: Present day advances and future challenges [Volume 3, Issue 4, 2018, Pages 274-283]

  • Ganesan, R. Optical constants change in As40Se60 and As50Se50 : A comparative study by FTIR and XPS [Volume 3, Issue 7, 2018, Pages 458-463]

  • Garai, Mrinmoy Zn2+ Substitution by Pb2+ in Alkaline-boro-aluminosilicate Glass-ceramics: Microstructural Aspects [Volume 3, Issue 4, 2018, Pages 206-212]

  • Garai, Subhadra Biomimetic three-dimensional carbon fiber reinforced polymer hydroxyapatite nanocomposite for major load bearing orthopedic application [Volume 3, Issue 1, 2018, Pages 22-24]

  • G Badagha, Damyanti Sustainable experimental investigation of mortar adopting industrial waste considering environmental effect [Volume 3, Issue 4, 2018, Pages 189-192]

  • Grieseler, Rolf Fabrication and luminescence properties in Yb –Tb co-doped a-SiCO thin films [Volume 3, Issue 6, 2018, Pages 372-376]

  • Grinberga, Liga Nanostructured carbon materials for hydrogen energetics [Volume 3, Issue 3, 2018, Pages 136-141]

  • Grushevskaya, Halina Charge transport in Weyl 2D materials [Volume 3, Issue 2, 2018, Pages 68-74]

  • Gulraze Anjum, Syed Influence of back barrier layer thickness on device performance of AlGaN/GaN MOS-HEMT [Volume 3, Issue 7, 2018, Pages 480-484]

  • Gulraze Anjum, Syed Analysis of optical gain characteristics of Type-I InGaAsN/GaAs (Dilute N) based lasing nano-heterostructure [Volume 3, Issue 9, 2018, Pages 558-561]

  • Gupta, Sitakshi Reduced graphene oxide-zinc oxide nano-composites for gas sensing applications [Volume 3, Issue 4, 2018, Pages 193-198]

H

  • Halder, Dipankar Catalytic and antibacterial activity of copper nanoparticle-starch composite [Volume 3, Issue 1, 2018, Pages 2-7]

  • H. Alkharabsheh, Saba A novel route for large-scale synthesis silver nanoparticles using Uncaria tomentosa leaves extract: Antibacterial activity [Volume 3, Issue 5, 2018, Pages 324-327]

  • Hashmi, S. A. R. Development of environment friendly electrical insulation from natural fibrils [Volume 3, Issue 4, 2018, Pages 218-229]

  • Hasumi, Masahiko Reduction in optical reflection at intermediate adhesive layer for mechanically stacked multi junction solar cells [Volume 3, Issue 5, 2018, Pages 361-365]

  • H. Ayachit, Narasimha Ba-ZnS passivation layer for improved performance of quantum dot sensitized solar cells [Volume 3, Issue 3, 2018, Pages 181-183]

  • Hee Kim, So ­­­Local electronic structure investigation of the sol-gel processed calcium hydroxide material [Volume 3, Issue 6, 2018, Pages 377-381]

  • Hein, Helen Innovative insulation materials - specific issues performing LCA in early development phases [Volume 3, Issue 9, 2018, Pages 531-535]

  • Hsiao, TaChing Optimization of the SiC powder source size distribution for the sublimation growth of long crystal boules [Volume 3, Issue 9, 2018, Pages 540-543]

  • H. Sidarai, Ashok Facial hydrothermal approach for the synthesis of Zinc oxide nanosheets [Volume 3, Issue 4, 2018, Pages 184-188]

  • Husain, Mushahid DFT Study of Ca-adsorbed MoS2 Monolayer for Hydrogen Storage Application [Volume 3, Issue 1, 2018, Pages 25-30]

  • Hwa Chae, Keun ­­­Local electronic structure investigation of the sol-gel processed calcium hydroxide material [Volume 3, Issue 6, 2018, Pages 377-381]

I

  • Isnandar, Dadang Customer acceptance evaluation of design for material value conservation using structural equation modelling: A case study of plastic packaging [Volume 3, Issue 6, 2018, Pages 396-399]

J

  • J, Santhip. Investigation of tribological and thermophysical properties of base oil containing nanoparticles as additives [Volume 3, Issue 2, 2018, Pages 108-111]

  • Jagtap, Ketan Some investigations on surface roughness and cutting force in face turning of biocompatible Co-Cr-Mo alloy [Volume 3, Issue 4, 2018, Pages 289-297]

  • Jakubowska, Paulina Carbon microfibers/silica aerogel nanocomposites based on water-glass [Volume 3, Issue 1, 2018, Pages 45-49]

  • Jamdagni, Pragati Biogenic synthesis of silver nanoparticles from leaf extract of Elettaria cardamomum and their antifungal activity against phytopathogens [Volume 3, Issue 3, 2018, Pages 129-135]

  • Jawaid Siddiqui, Mohammad Analysis of optical gain characteristics of Type-I InGaAsN/GaAs (Dilute N) based lasing nano-heterostructure [Volume 3, Issue 9, 2018, Pages 558-561]

  • Jawaid Siddiqui, Mohd Influence of back barrier layer thickness on device performance of AlGaN/GaN MOS-HEMT [Volume 3, Issue 7, 2018, Pages 480-484]

  • Jekabsons, Laimonis Nanostructured carbon materials for hydrogen energetics [Volume 3, Issue 3, 2018, Pages 136-141]

  • Jeyasingh, T Charge carrier transport mechanism in combustion synthesized PrAlO3 perovskite [Volume 3, Issue 9, 2018, Pages 562-565]

  • Jojeph, Florence Electrochemical synthesis of copper (II) based metal organic frameworks: Determination of structure by Single X-ray diffraction crystallography and other supportive techniques [Volume 3, Issue 7, 2018, Pages 469-474]

  • J. Sánchez, Héctor Sol-gel synthesis of mixed ferrites for biomedical applications [Volume 3, Issue 6, 2018, Pages 400-403]

  • J. Wellmann, Peter Optimization of the SiC powder source size distribution for the sublimation growth of long crystal boules [Volume 3, Issue 9, 2018, Pages 540-543]

K

  • Kalarikkal, Nandakumar A comparative study on NiO nanocrystal modified graphite and Au electrode matrices as immobilization supports for laccase enzyme in amperometric biosensing for catechol detection [Volume 3, Issue 5, 2018, Pages 304-311]

  • Kalia, Rajesh Swift Heavy ion irradiation effects on dielectric constant and dielectric loss in poly (ether ether ketone) (PEEK) [Volume 3, Issue 3, 2018, Pages 146-150]

  • Kalia, Sapna Swift Heavy ion irradiation effects on dielectric constant and dielectric loss in poly (ether ether ketone) (PEEK) [Volume 3, Issue 3, 2018, Pages 146-150]

  • Kalpana, K Fabrication of GC-r-GO-PAMAM (G3)-Pd electrode for electro-catalytic oxidation of formic acid [Volume 3, Issue 2, 2018, Pages 75-81]

  • Kanaujia, Sudhanshu A comparative study on fluoride adsorption by Al (III) modified clinoptilolite and carbonised punica granatum carbon [Volume 3, Issue 3, 2018, Pages 142-145]

  • Kang, Yuru Nanoscale dispersion of palygorskite bundles by a facile mechanical/chemical approach [Volume 3, Issue 7, 2018, Pages 447-453]

  • Kannan, K. A novel cage type, multifunctional catalyst from natural kaolin [Volume 3, Issue 2, 2018, Pages 82-84]

  • Karmakar, Anupam Self-rectifying threshold resistive switching based non-volatile memory of CBD/CBD grown vertical n-ZnO nanowire/p-Si heterojunction diodes [Volume 3, Issue 4, 2018, Pages 298-303]

  • Karmakar, Basudeb Zn2+ Substitution by Pb2+ in Alkaline-boro-aluminosilicate Glass-ceramics: Microstructural Aspects [Volume 3, Issue 4, 2018, Pages 206-212]

  • Kaur, Davinder Sputtered nanostructured single crystalline cu doped ZnO thin films for carbon monoxide gas sensing applications [Volume 3, Issue 5, 2018, Pages 312-317]

  • K. Gupta, Raj Solvothermal synthesis of nanosized cobalt antimonide for thermoelectrics [Volume 3, Issue 2, 2018, Pages 99-102]

  • K. Gupta, Raj Thermoelectric properties of hot-pressed pellets of Al and Ti co-doped calcium cobalt oxides (Ca(3-x)AlxCo(4-y)TiyO9+δ) [Volume 3, Issue 2, 2018, Pages 103-107]

  • Khatri, Poonam Biogenic synthesis of silver nanoparticles from leaf extract of Elettaria cardamomum and their antifungal activity against phytopathogens [Volume 3, Issue 3, 2018, Pages 129-135]

  • K. Jain, Anil Investigation of tribo-performance and rheological behavior of lubricants: influence of MoS2 nano-particles [Volume 3, Issue 3, 2018, Pages 164-169]

  • K. Kar, Kamal Effect of silicon carbide nanoparticles on dielectric (2.45 GHz) and thermal properties of epoxy nanocomposites for microwave curing [Volume 3, Issue 3, 2018, Pages 170-174]

  • K. Kar, Kamal Impact of particle sizes on the microwave absorption properties of nano-sized Carbon black/epoxy composites [Volume 3, Issue 8, 2018, Pages 497-500]

  • Kleperis, Janis Nanostructured carbon materials for hydrogen energetics [Volume 3, Issue 3, 2018, Pages 136-141]

  • K. Mahapatro, Ajit Solvothermal synthesis of nanosized cobalt antimonide for thermoelectrics [Volume 3, Issue 2, 2018, Pages 99-102]

  • K. Mahapatro, Ajit Thermoelectric properties of hot-pressed pellets of Al and Ti co-doped calcium cobalt oxides (Ca(3-x)AlxCo(4-y)TiyO9+δ) [Volume 3, Issue 2, 2018, Pages 103-107]

  • Knite, Maris Nanostructured carbon materials for hydrogen energetics [Volume 3, Issue 3, 2018, Pages 136-141]

  • Kon Kim, Jin A review on the electrical and electrochemical behavior of composites based on carbon nanotube, graphene and their derivatives [Volume 3, Issue 4, 2018, Pages 230-273]

  • Kormanikova, Eva Mixed-mode delamination in laminate plate with crack [Volume 3, Issue 8, 2018, Pages 512-516]

  • Kotrasova, Kamila Mixed-mode delamination in laminate plate with crack [Volume 3, Issue 8, 2018, Pages 512-516]

  • K. Pandey, Gyanendra Study of geometry dependent Raman enhancement factor of a single biomolecule [Volume 3, Issue 3, 2018, Pages 161-163]

  • K. Pathak, Nilesh Study of geometry dependent Raman enhancement factor of a single biomolecule [Volume 3, Issue 3, 2018, Pages 161-163]

  • K. Pattanaik, Akhyaya Solvothermal synthesis of nanosized cobalt antimonide for thermoelectrics [Volume 3, Issue 2, 2018, Pages 99-102]

  • Krylov, George Charge transport in Weyl 2D materials [Volume 3, Issue 2, 2018, Pages 68-74]

  • K. Sharma, Pawan Ag nanoparticles induced modification in microhardness of polyvinyl alcohol [Volume 3, Issue 8, 2018, Pages 508-511]

  • K Shukla, Rajesh Microwave absorption properties of Fe-Co oxide - thermally exfoliated graphene oxide composite [Volume 3, Issue 2, 2018, Pages 85-92]

  • K Shukla, Rajesh Dielectric properties of epoxy based composites containing graphite, graphite oxide and thermally exfoliated graphene oxide [Volume 3, Issue 2, 2018, Pages 93-98]

  • K. Singh, Sanjay A comparative study on fluoride adsorption by Al (III) modified clinoptilolite and carbonised punica granatum carbon [Volume 3, Issue 3, 2018, Pages 142-145]

  • K. Srivastava, Avanish Microwave absorption properties of Fe-Co oxide - thermally exfoliated graphene oxide composite [Volume 3, Issue 2, 2018, Pages 85-92]

  • K. Srivastava, Avanish Dielectric properties of epoxy based composites containing graphite, graphite oxide and thermally exfoliated graphene oxide [Volume 3, Issue 2, 2018, Pages 93-98]

  • Kumar, Ajay Investigation of tribo-performance and rheological behavior of lubricants: influence of MoS2 nano-particles [Volume 3, Issue 3, 2018, Pages 164-169]

  • Kumar, Arvind Sputtered nanostructured single crystalline cu doped ZnO thin films for carbon monoxide gas sensing applications [Volume 3, Issue 5, 2018, Pages 312-317]

  • Kumar, Narendra Microwave absorption properties of Fe-Co oxide - thermally exfoliated graphene oxide composite [Volume 3, Issue 2, 2018, Pages 85-92]

  • Kumar, Narendra Dielectric properties of epoxy based composites containing graphite, graphite oxide and thermally exfoliated graphene oxide [Volume 3, Issue 2, 2018, Pages 93-98]

  • Kumar, Nitin Tweaking homogeneity and stability of gold nanorods by synergistic action of pH and temperature [Volume 3, Issue 8, 2018, Pages 501-507]

  • Kumar, Pawan Sputtered nanostructured single crystalline cu doped ZnO thin films for carbon monoxide gas sensing applications [Volume 3, Issue 5, 2018, Pages 312-317]

  • Kumar, Rajnish Development of environment friendly electrical insulation from natural fibrils [Volume 3, Issue 4, 2018, Pages 218-229]

  • Kumar, Virendra Gamma radiolytic synthesis of poly(2, 3-Epoxy-propylmethacrylate)-stabilized-gold nanoparticles: an efficient catalyst for p-nitrophenol reduction [Volume 3, Issue 4, 2018, Pages 199-205]

  • Kumara Swamy, N Electrochemical glucose biosensor based on biosynthesized silver nanoparticles and polyvinylpyrolidone modified graphite electrode [Volume 3, Issue 5, 2018, Pages 318-323]

  • Kumar Goel, Narender Gamma radiolytic synthesis of poly(2, 3-Epoxy-propylmethacrylate)-stabilized-gold nanoparticles: an efficient catalyst for p-nitrophenol reduction [Volume 3, Issue 4, 2018, Pages 199-205]

  • Kumar Karan, Sumanta A review on the electrical and electrochemical behavior of composites based on carbon nanotube, graphene and their derivatives [Volume 3, Issue 4, 2018, Pages 230-273]

  • Kumar.R, Rishi Investigation of tribological and thermophysical properties of base oil containing nanoparticles as additives [Volume 3, Issue 2, 2018, Pages 108-111]

  • Kumar Singh, Sandeep Effect of silicon carbide nanoparticles on dielectric (2.45 GHz) and thermal properties of epoxy nanocomposites for microwave curing [Volume 3, Issue 3, 2018, Pages 170-174]

  • Kumar Singh, Sandeep Impact of particle sizes on the microwave absorption properties of nano-sized Carbon black/epoxy composites [Volume 3, Issue 8, 2018, Pages 497-500]

  • Kumar Tiwari, Pankaj Synthesis and performance of La0.5Sr0.5CoO3 cathode for low and intermediate temperature solid oxide fuel cells [Volume 3, Issue 2, 2018, Pages 118-124]

  • Kumar Yadav, Amit Impact of particle sizes on the microwave absorption properties of nano-sized Carbon black/epoxy composites [Volume 3, Issue 8, 2018, Pages 497-500]

L

  • Lekshmi, I. C. A comparative study on NiO nanocrystal modified graphite and Au electrode matrices as immobilization supports for laccase enzyme in amperometric biosensing for catechol detection [Volume 3, Issue 5, 2018, Pages 304-311]

  • Lesnicenoks, Peteris Nanostructured carbon materials for hydrogen energetics [Volume 3, Issue 3, 2018, Pages 136-141]

  • L. Mohanta, Kamal Effect of gamma irradiation on mechanical properties of poly (lactic) acid–luffa fiber composites [Volume 3, Issue 4, 2018, Pages 284-288]

  • Lopez-Barbosa, Natalia Polymeric number average molecular weight in submicron films as a tool for the manipulation of water phenomena in translucent coatings [Volume 3, Issue 6, 2018, Pages 392-395]

  • Louro, Paula Photodetection of modulated light of white RGB LEDs with a-SiC:H device [Volume 3, Issue 5, 2018, Pages 366-371]

  • Louro, Paula Smart vehicle lighting system based on a-SiCH technology [Volume 3, Issue 9, 2018, Pages 544-549]

  • Lwisa, Essa Green water flooding of fractured and heterogeneous oil reservoirs at high salinity and high temperature [Volume 3, Issue 6, 2018, Pages 386-391]

M

  • Maiti, Sandip A review on the electrical and electrochemical behavior of composites based on carbon nanotube, graphene and their derivatives [Volume 3, Issue 4, 2018, Pages 230-273]

  • M. Aminabhavi, Tejraj Chitosan-magnesium aluminum silicate nanocomposite microspheres coated with poly(vinyl acetate phthalate) for controlled release of capecitabine [Volume 3, Issue 9, 2018, Pages 550-557]

  • Mani, Santosh A. Optical and Thermal studies on CNT doped Liquid Crystal Mixtures [Volume 3, Issue 1, 2018, Pages 41-44]

  • M. Awwad, Akl A novel route for large-scale synthesis silver nanoparticles using Uncaria tomentosa leaves extract: Antibacterial activity [Volume 3, Issue 5, 2018, Pages 324-327]

  • M. Eappen, Shibu Charge carrier transport mechanism in combustion synthesized PrAlO3 perovskite [Volume 3, Issue 9, 2018, Pages 562-565]

  • Melo, J S Electrochemical glucose biosensor based on biosynthesized silver nanoparticles and polyvinylpyrolidone modified graphite electrode [Volume 3, Issue 5, 2018, Pages 318-323]

  • M Gengan, Robert Synthesis and characterisations of boron nitride based propyl triethylenetetramine sulfonic acid catalyst [Volume 3, Issue 7, 2018, Pages 475-479]

  • M. G. Saldívar-Ramírez, Mirna Sol-gel synthesis of mixed ferrites for biomedical applications [Volume 3, Issue 6, 2018, Pages 400-403]

  • M. Hunagund, Shirajahammad Facial hydrothermal approach for the synthesis of Zinc oxide nanosheets [Volume 3, Issue 4, 2018, Pages 184-188]

  • Misra, Nilanjal Gamma radiolytic synthesis of poly(2, 3-Epoxy-propylmethacrylate)-stabilized-gold nanoparticles: an efficient catalyst for p-nitrophenol reduction [Volume 3, Issue 4, 2018, Pages 199-205]

  • Mitra, Atanu Catalytic and antibacterial activity of copper nanoparticle-starch composite [Volume 3, Issue 1, 2018, Pages 2-7]

  • M. Kulkarni, Raviraj Ba-ZnS passivation layer for improved performance of quantum dot sensitized solar cells [Volume 3, Issue 3, 2018, Pages 181-183]

  • M. Kulkarni, Raviraj Cu-ZnO nanoparticles for photocatalytic degradation of methyl orange [Volume 3, Issue 8, 2018, Pages 521-525]

  • M. Kulkarni, Raviraj Ag-TiO2 nanoparticles for photocatalytic degradation of sparfloxacin [Volume 3, Issue 8, 2018, Pages 526-529]

  • Modhera, C D Sustainable experimental investigation of mortar adopting industrial waste considering environmental effect [Volume 3, Issue 4, 2018, Pages 189-192]

  • Mogre, Pradyumna Synthesis and characterization studies of polyaniline nano fibres [Volume 3, Issue 3, 2018, Pages 178-180]

  • M. Salem, Nidá A novel route for large-scale synthesis silver nanoparticles using Uncaria tomentosa leaves extract: Antibacterial activity [Volume 3, Issue 5, 2018, Pages 324-327]

  • Mukhopadhyay, Kingsuk Micro-fibrillar fiber of bicomponent polymer blends: Traditional paradigm with modern approach [Volume 3, Issue 7, 2018, Pages 433-442]

  • Mula, Suhrit Improvement of mechanical properties of Cu-10% Zn alloy processed by cryoforging [Volume 3, Issue 1, 2018, Pages 50-53]

  • Murthy, S. R. Effect of Dy3+ substitution on microwave behaviour of nanocrystalline Mn-Zn Ferrite [Volume 3, Issue 7, 2018, Pages 464-468]

  • Murugan, E. Fabrication of GC-r-GO-PAMAM (G3)-Pd electrode for electro-catalytic oxidation of formic acid [Volume 3, Issue 2, 2018, Pages 75-81]

  • Murugan, E. Synthesis of Ag nanoparticles decorated CeO2 nanocomposite material for effective SERS analysis [Volume 3, Issue 2, 2018, Pages 112-117]

  • Murugesan, Arul Synthesis and characterisations of boron nitride based propyl triethylenetetramine sulfonic acid catalyst [Volume 3, Issue 7, 2018, Pages 475-479]

  • M. Zagloel, T. Yuri Customer acceptance evaluation of design for material value conservation using structural equation modelling: A case study of plastic packaging [Volume 3, Issue 6, 2018, Pages 396-399]

N

  • Naik, Ajay Development of environment friendly electrical insulation from natural fibrils [Volume 3, Issue 4, 2018, Pages 218-229]

  • Naik, Ramakanta Optical constants change in As40Se60 and As50Se50 : A comparative study by FTIR and XPS [Volume 3, Issue 7, 2018, Pages 458-463]

  • Nara, Seema Tweaking homogeneity and stability of gold nanorods by synergistic action of pH and temperature [Volume 3, Issue 8, 2018, Pages 501-507]

  • Narasimhamurthy, B. A comparative study on NiO nanocrystal modified graphite and Au electrode matrices as immobilization supports for laccase enzyme in amperometric biosensing for catechol detection [Volume 3, Issue 5, 2018, Pages 304-311]

  • N. Delpupo, María Influence of electroplating stages on hydrogen pickup in SAE 1005 steel [Volume 3, Issue 5, 2018, Pages 356-360]

  • Neelima, P. Effect of Dy3+ substitution on microwave behaviour of nanocrystalline Mn-Zn Ferrite [Volume 3, Issue 7, 2018, Pages 464-468]

  • Nigrawal, Archana Development of environment friendly electrical insulation from natural fibrils [Volume 3, Issue 4, 2018, Pages 218-229]

  • Nimanpure, Subhash Development of environment friendly electrical insulation from natural fibrils [Volume 3, Issue 4, 2018, Pages 218-229]

  • N. Inés, Mariano Influence of electroplating stages on hydrogen pickup in SAE 1005 steel [Volume 3, Issue 5, 2018, Pages 356-360]

  • N. Zambare, Dnyandevo Synthesis and characterization study of dual phase mixed zinc cobalt ferrite nanoparticles prepared via chemical co-precipitation method [Volume 3, Issue 8, 2018, Pages 517-520]

O

  • Ogawa, Yoshihiro Reduction in optical reflection at intermediate adhesive layer for mechanically stacked multi junction solar cells [Volume 3, Issue 5, 2018, Pages 361-365]

  • Ok Won, Sung ­­­Local electronic structure investigation of the sol-gel processed calcium hydroxide material [Volume 3, Issue 6, 2018, Pages 377-381]

  • Osvet, Andres Fabrication and luminescence properties in Yb –Tb co-doped a-SiCO thin films [Volume 3, Issue 6, 2018, Pages 372-376]

P

  • Pal, Ranu Effect of silicon carbide nanoparticles on dielectric (2.45 GHz) and thermal properties of epoxy nanocomposites for microwave curing [Volume 3, Issue 3, 2018, Pages 170-174]

  • Pal, Ranu Impact of particle sizes on the microwave absorption properties of nano-sized Carbon black/epoxy composites [Volume 3, Issue 8, 2018, Pages 497-500]

  • Pal Singh, Jitendra ­­­Local electronic structure investigation of the sol-gel processed calcium hydroxide material [Volume 3, Issue 6, 2018, Pages 377-381]

  • Pandey, Ashutosh Band gap engineered Nb2O5 thin films fabricated from sol-gel processed modified precursors for enhanced photocatalytic activity: A comparative study [Volume 3, Issue 5, 2018, Pages 328-334]

  • Parida, Chhatrapati Effect of gamma irradiation on mechanical properties of poly (lactic) acid–luffa fiber composites [Volume 3, Issue 4, 2018, Pages 284-288]

  • Patra, Subhashree Effect of gamma irradiation on mechanical properties of poly (lactic) acid–luffa fiber composites [Volume 3, Issue 4, 2018, Pages 284-288]

  • Paulson, Anju Cobalt doped SnO2: A new material for thermoelectric application [Volume 3, Issue 1, 2018, Pages 8-12]

  • Pawade, Raju Some investigations on surface roughness and cutting force in face turning of biocompatible Co-Cr-Mo alloy [Volume 3, Issue 4, 2018, Pages 289-297]

  • P. Chimankar, Ompraksh Electrical properties of CuInTe2(1-x)S2x thin film by spray pyrolysis [Volume 3, Issue 2, 2018, Pages 125-128]

  • Pradyumnan, P.P. Cobalt doped SnO2: A new material for thermoelectric application [Volume 3, Issue 1, 2018, Pages 8-12]

  • Pranav, S. A novel cage type, multifunctional catalyst from natural kaolin [Volume 3, Issue 2, 2018, Pages 82-84]

  • Prasad, Brijesh Scope, development, application of magnesium as bioresorable material [Volume 3, Issue 2, 2018, Pages 58-67]

  • Prasad.M.J, Giri Investigation of tribological and thermophysical properties of base oil containing nanoparticles as additives [Volume 3, Issue 2, 2018, Pages 108-111]

  • Prem Ananth, K. A review of recent advances biomedical implants and their application [Volume 3, Issue 8, 2018, Pages 486-493]

  • Priyanka, . Growth of GNTs with backbone Xn@Au6n(n=1,3,5,7,9) (X = Ag, Cu, Au) [Volume 3, Issue 3, 2018, Pages 175-177]

  • Prošek, Zdeněk Study on time-dependent surface properties of plasma treated polymer fibers [Volume 3, Issue 6, 2018, Pages 382-385]

  • P. Tandon, Ram Solvothermal synthesis of nanosized cobalt antimonide for thermoelectrics [Volume 3, Issue 2, 2018, Pages 99-102]

  • P. Tandon, Ram Thermoelectric properties of hot-pressed pellets of Al and Ti co-doped calcium cobalt oxides (Ca(3-x)AlxCo(4-y)TiyO9+δ) [Volume 3, Issue 2, 2018, Pages 103-107]

  • Puri, Nidhi Solvothermal synthesis of nanosized cobalt antimonide for thermoelectrics [Volume 3, Issue 2, 2018, Pages 99-102]

R

  • Raaj.A.S, Abhishek Investigation of tribological and thermophysical properties of base oil containing nanoparticles as additives [Volume 3, Issue 2, 2018, Pages 108-111]

  • Radha Krishna, B. Influence of oxygen partial pressure and annealing temperature on the physical properties of nanostructured ZnO thin films prepared by RF magnetron sputtering [Volume 3, Issue 9, 2018, Pages 570-576]

  • Radhakrishnan, R Charge carrier transport mechanism in combustion synthesized PrAlO3 perovskite [Volume 3, Issue 9, 2018, Pages 562-565]

  • Rajbhoj, Anjali S . Symmetrical and unsymmetrical squaraine sensitizers for dye-sensitized solar cells: Present day advances and future challenges [Volume 3, Issue 4, 2018, Pages 274-283]

  • Rajesh, S. Enhancement of luminescence properties of Mn2+ substituted dysprosium doped Zinc sulfide nanophosphor [Volume 3, Issue 6, 2018, Pages 419-424]

  • Raman, A. Synthesis of Ag nanoparticles decorated CeO2 nanocomposite material for effective SERS analysis [Volume 3, Issue 2, 2018, Pages 112-117]

  • R. Amare, Jyoti Optical and Thermal studies on CNT doped Liquid Crystal Mixtures [Volume 3, Issue 1, 2018, Pages 41-44]

  • Ramesh, Dinesh Investigation of tribological and thermophysical properties of base oil containing nanoparticles as additives [Volume 3, Issue 2, 2018, Pages 108-111]

  • Rana, J. S. Biogenic synthesis of silver nanoparticles from leaf extract of Elettaria cardamomum and their antifungal activity against phytopathogens [Volume 3, Issue 3, 2018, Pages 129-135]

  • Ravikant, Chhaya Reduced graphene oxide-zinc oxide nano-composites for gas sensing applications [Volume 3, Issue 4, 2018, Pages 193-198]

  • Rawat, Swarnima Gamma radiolytic synthesis of poly(2, 3-Epoxy-propylmethacrylate)-stabilized-gold nanoparticles: an efficient catalyst for p-nitrophenol reduction [Volume 3, Issue 4, 2018, Pages 199-205]

  • R. Benavidez, Edgardo Correlation between structural aspects and mechanical properties of an Interstitial Free steel for automotive application [Volume 3, Issue 6, 2018, Pages 408-413]

  • R. Bhattacharya, Arup Micro-fibrillar fiber of bicomponent polymer blends: Traditional paradigm with modern approach [Volume 3, Issue 7, 2018, Pages 433-442]

  • R. Desai, Vani Facial hydrothermal approach for the synthesis of Zinc oxide nanosheets [Volume 3, Issue 4, 2018, Pages 184-188]

  • Reddy Minnam Reddy, Vasudeva Enhancement of luminescence properties of Mn2+ substituted dysprosium doped Zinc sulfide nanophosphor [Volume 3, Issue 6, 2018, Pages 419-424]

  • Rehan, Touseef Fabrication of biocompatible nanocomposite consisted of zinc oxide nanoparticles based poly (Acrylonitrile-co-Acrylic acid) [Volume 3, Issue 6, 2018, Pages 425-431]

  • Rekha, K. A comparative study on NiO nanocrystal modified graphite and Au electrode matrices as immobilization supports for laccase enzyme in amperometric biosensing for catechol detection [Volume 3, Issue 5, 2018, Pages 304-311]

  • R. Kulkarni, Deepti Ba-ZnS passivation layer for improved performance of quantum dot sensitized solar cells [Volume 3, Issue 3, 2018, Pages 181-183]

  • Rodríguez, Carlos Mechanical, microstructural characterization and redesign of a BMX bicycle frame [Volume 3, Issue 6, 2018, Pages 404-407]

  • Romanyuk, Mykaylo High deformation effects on the plasticity of ultra-high carbon steel wires [Volume 3, Issue 6, 2018, Pages 414-418]

  • Romanyuk, Mykhaylo Deformation mechanisms that explain the combination of high plasticity and strength in steels wires with extreme carbon content [Volume 3, Issue 5, 2018, Pages 344-350]

  • Romanyuk, Mykhaylo Correlation between structural aspects and mechanical properties of an Interstitial Free steel for automotive application [Volume 3, Issue 6, 2018, Pages 408-413]

  • Roy, Debmalya Micro-fibrillar fiber of bicomponent polymer blends: Traditional paradigm with modern approach [Volume 3, Issue 7, 2018, Pages 433-442]

  • R. Powar, Rohit Synthesis and characterization study of dual phase mixed zinc cobalt ferrite nanoparticles prepared via chemical co-precipitation method [Volume 3, Issue 8, 2018, Pages 517-520]

S

  • S, Devashankar. Investigation of tribological and thermophysical properties of base oil containing nanoparticles as additives [Volume 3, Issue 2, 2018, Pages 108-111]

  • Sabeer N.A, Muhammed Cobalt doped SnO2: A new material for thermoelectric application [Volume 3, Issue 1, 2018, Pages 8-12]

  • Saha, Rajib Self-rectifying threshold resistive switching based non-volatile memory of CBD/CBD grown vertical n-ZnO nanowire/p-Si heterojunction diodes [Volume 3, Issue 4, 2018, Pages 298-303]

  • Saha, R.K. Study of structural, optical and antibacterial properties of starch-capped Cu doped ZnO nanoparticles (NPs) [Volume 3, Issue 1, 2018, Pages 36-40]

  • Saikia, E. Study of structural, optical and antibacterial properties of starch-capped Cu doped ZnO nanoparticles (NPs) [Volume 3, Issue 1, 2018, Pages 36-40]

  • Saikia, K.K. Study of structural, optical and antibacterial properties of starch-capped Cu doped ZnO nanoparticles (NPs) [Volume 3, Issue 1, 2018, Pages 36-40]

  • Saini, Isha Ag nanoparticles induced modification in microhardness of polyvinyl alcohol [Volume 3, Issue 8, 2018, Pages 508-511]

  • Saini, Kalawati Electrochemical synthesis of copper (II) based metal organic frameworks: Determination of structure by Single X-ray diffraction crystallography and other supportive techniques [Volume 3, Issue 7, 2018, Pages 469-474]

  • Samaria, Bhumika Microwave absorption properties of Fe-Co oxide - thermally exfoliated graphene oxide composite [Volume 3, Issue 2, 2018, Pages 85-92]

  • Samaria, Bhumika Dielectric properties of epoxy based composites containing graphite, graphite oxide and thermally exfoliated graphene oxide [Volume 3, Issue 2, 2018, Pages 93-98]

  • Sameshima, Toshiyuki Reduction in optical reflection at intermediate adhesive layer for mechanically stacked multi junction solar cells [Volume 3, Issue 5, 2018, Pages 361-365]

  • Sandeep, S Electrochemical glucose biosensor based on biosynthesized silver nanoparticles and polyvinylpyrolidone modified graphite electrode [Volume 3, Issue 5, 2018, Pages 318-323]

  • Sanger, Amit Sputtered nanostructured single crystalline cu doped ZnO thin films for carbon monoxide gas sensing applications [Volume 3, Issue 5, 2018, Pages 312-317]

  • Santharaj.N, Jerome Investigation of tribological and thermophysical properties of base oil containing nanoparticles as additives [Volume 3, Issue 2, 2018, Pages 108-111]

  • SanthoshA, S Electrochemical glucose biosensor based on biosynthesized silver nanoparticles and polyvinylpyrolidone modified graphite electrode [Volume 3, Issue 5, 2018, Pages 318-323]

  • Santhosh Kumar, S. Synthesis of Ag nanoparticles decorated CeO2 nanocomposite material for effective SERS analysis [Volume 3, Issue 2, 2018, Pages 112-117]

  • Sarika, C. A comparative study on NiO nanocrystal modified graphite and Au electrode matrices as immobilization supports for laccase enzyme in amperometric biosensing for catechol detection [Volume 3, Issue 5, 2018, Pages 304-311]

  • Sarkar, Chandrani Biomimetic three-dimensional carbon fiber reinforced polymer hydroxyapatite nanocomposite for major load bearing orthopedic application [Volume 3, Issue 1, 2018, Pages 22-24]

  • S. Bhatia, Smriti Electrochemical synthesis of copper (II) based metal organic frameworks: Determination of structure by Single X-ray diffraction crystallography and other supportive techniques [Volume 3, Issue 7, 2018, Pages 469-474]

  • S Chauhan, Virendra Microwave absorption properties of Fe-Co oxide - thermally exfoliated graphene oxide composite [Volume 3, Issue 2, 2018, Pages 85-92]

  • S Chauhan, Virendra Dielectric properties of epoxy based composites containing graphite, graphite oxide and thermally exfoliated graphene oxide [Volume 3, Issue 2, 2018, Pages 93-98]

  • Schwarte, Joachim Innovative insulation materials - specific issues performing LCA in early development phases [Volume 3, Issue 9, 2018, Pages 531-535]

  • Shah, Nasrullah Fabrication of biocompatible nanocomposite consisted of zinc oxide nanoparticles based poly (Acrylonitrile-co-Acrylic acid) [Volume 3, Issue 6, 2018, Pages 425-431]

  • Shahid Khan, Mohd. DFT Study of Ca-adsorbed MoS2 Monolayer for Hydrogen Storage Application [Volume 3, Issue 1, 2018, Pages 25-30]

  • S. Hanagadakar, Manjunath Cu-ZnO nanoparticles for photocatalytic degradation of methyl orange [Volume 3, Issue 8, 2018, Pages 521-525]

  • S. Hanagadakar, Manjunath Ag-TiO2 nanoparticles for photocatalytic degradation of sparfloxacin [Volume 3, Issue 8, 2018, Pages 526-529]

  • Shandilya, Pragya Experimental study on performance characteristics of Ni-rich NiTi shape memory alloy in wire electric discharge machining (WEDM) [Volume 3, Issue 5, 2018, Pages 335-339]

  • Shanmugam, P. A novel cage type, multifunctional catalyst from natural kaolin [Volume 3, Issue 2, 2018, Pages 82-84]

  • Sharma, Annu Ag nanoparticles induced modification in microhardness of polyvinyl alcohol [Volume 3, Issue 8, 2018, Pages 508-511]

  • Sharma, Archana DFT Study of Ca-adsorbed MoS2 Monolayer for Hydrogen Storage Application [Volume 3, Issue 1, 2018, Pages 25-30]

  • Sharma, J. K. Swift Heavy ion irradiation effects on dielectric constant and dielectric loss in poly (ether ether ketone) (PEEK) [Volume 3, Issue 3, 2018, Pages 146-150]

  • Sharma, Mohini Influence of back barrier layer thickness on device performance of AlGaN/GaN MOS-HEMT [Volume 3, Issue 7, 2018, Pages 480-484]

  • Sharma, Nisha Scope, development, application of magnesium as bioresorable material [Volume 3, Issue 2, 2018, Pages 58-67]

  • Sharma, R. P. Study of geometry dependent Raman enhancement factor of a single biomolecule [Volume 3, Issue 3, 2018, Pages 161-163]

  • Sharma, Shivesh Tweaking homogeneity and stability of gold nanorods by synergistic action of pH and temperature [Volume 3, Issue 8, 2018, Pages 501-507]

  • Sharma, S.K. Impact of thermal treatment parameter on the properties of Cu2ZnSnS4 solar absorber layer [Volume 3, Issue 1, 2018, Pages 13-16]

  • Shivakumar, M.S. A comparative study on NiO nanocrystal modified graphite and Au electrode matrices as immobilization supports for laccase enzyme in amperometric biosensing for catechol detection [Volume 3, Issue 5, 2018, Pages 304-311]

  • Shukla, Anuj Microwave absorption properties of Fe-Co oxide - thermally exfoliated graphene oxide composite [Volume 3, Issue 2, 2018, Pages 85-92]

  • Shukla, Anuj Dielectric properties of epoxy based composites containing graphite, graphite oxide and thermally exfoliated graphene oxide [Volume 3, Issue 2, 2018, Pages 93-98]

  • Sihono Gabriel, Djoko Customer acceptance evaluation of design for material value conservation using structural equation modelling: A case study of plastic packaging [Volume 3, Issue 6, 2018, Pages 396-399]

  • Singh, Bharat A comparative study on fluoride adsorption by Al (III) modified clinoptilolite and carbonised punica granatum carbon [Volume 3, Issue 3, 2018, Pages 142-145]

  • Singh, Jitendra Microwave absorption properties of Fe-Co oxide - thermally exfoliated graphene oxide composite [Volume 3, Issue 2, 2018, Pages 85-92]

  • Singh, Jitendra Dielectric properties of epoxy based composites containing graphite, graphite oxide and thermally exfoliated graphene oxide [Volume 3, Issue 2, 2018, Pages 93-98]

  • Sivakumar, V.M. A novel cage type, multifunctional catalyst from natural kaolin [Volume 3, Issue 2, 2018, Pages 82-84]

  • Sivasankar Reddy, A Influence of oxygen partial pressure and annealing temperature on the physical properties of nanostructured ZnO thin films prepared by RF magnetron sputtering [Volume 3, Issue 9, 2018, Pages 570-576]

  • S. Jamil, Tarek Enhancing photocatalytic performance of BiOX for Bisphenol – A degradation [Volume 3, Issue 3, 2018, Pages 155-160]

  • S K, Saji Charge carrier transport mechanism in combustion synthesized PrAlO3 perovskite [Volume 3, Issue 9, 2018, Pages 562-565]

  • S. Lebelo, Ramoshweu Radiative heat loss impact modelling on thermal decomposition analysis in a reactive slab of variable thermal conductivity [Volume 3, Issue 3, 2018, Pages 151-154]

  • S M, Dasharath Improvement of mechanical properties of Cu-10% Zn alloy processed by cryoforging [Volume 3, Issue 1, 2018, Pages 50-53]

  • S. Malladi, Ramesh Cu-ZnO nanoparticles for photocatalytic degradation of methyl orange [Volume 3, Issue 8, 2018, Pages 521-525]

  • S. Malladi, Ramesh Ag-TiO2 nanoparticles for photocatalytic degradation of sparfloxacin [Volume 3, Issue 8, 2018, Pages 526-529]

  • S. Manjeshwar, Lata Chitosan-magnesium aluminum silicate nanocomposite microspheres coated with poly(vinyl acetate phthalate) for controlled release of capecitabine [Volume 3, Issue 9, 2018, Pages 550-557]

  • S. Mansor, Eman Enhancing photocatalytic performance of BiOX for Bisphenol – A degradation [Volume 3, Issue 3, 2018, Pages 155-160]

  • S. Meshram, Anil Electrical properties of CuInTe2(1-x)S2x thin film by spray pyrolysis [Volume 3, Issue 2, 2018, Pages 125-128]

  • Sobhana Wariar, P R Charge carrier transport mechanism in combustion synthesized PrAlO3 perovskite [Volume 3, Issue 9, 2018, Pages 562-565]

  • Soni, Smita Microwave absorption properties of Fe-Co oxide - thermally exfoliated graphene oxide composite [Volume 3, Issue 2, 2018, Pages 85-92]

  • Soni, Smita Dielectric properties of epoxy based composites containing graphite, graphite oxide and thermally exfoliated graphene oxide [Volume 3, Issue 2, 2018, Pages 93-98]

  • Soo Jeon, Gyung On characterizing microscopically the adhesion interphases with humidity aging time for the adhesion between brass-plated steel cords and rubber compounds by Auger Electron Spectroscopy and FE-SEM [Volume 3, Issue 7, 2018, Pages 454-457]

  • S. Pradhan, Madhavi Optical and Thermal studies on CNT doped Liquid Crystal Mixtures [Volume 3, Issue 1, 2018, Pages 41-44]

  • S. Pujar, Malatesh Facial hydrothermal approach for the synthesis of Zinc oxide nanosheets [Volume 3, Issue 4, 2018, Pages 184-188]

  • Sreenivasulu, B. Synthesis and Properties of (Mn, Ni) co-doped ZnS nanoparticles [Volume 3, Issue 9, 2018, Pages 566-569]

  • Srikanth, T. Influence of oxygen partial pressure and annealing temperature on the physical properties of nanostructured ZnO thin films prepared by RF magnetron sputtering [Volume 3, Issue 9, 2018, Pages 570-576]

  • Sripan, C. Optical constants change in As40Se60 and As50Se50 : A comparative study by FTIR and XPS [Volume 3, Issue 7, 2018, Pages 458-463]

  • Srivastava, Anurag DFT Study of Ca-adsorbed MoS2 Monolayer for Hydrogen Storage Application [Volume 3, Issue 1, 2018, Pages 25-30]

  • S. Saharan, Baljeet Scope, development, application of magnesium as bioresorable material [Volume 3, Issue 2, 2018, Pages 58-67]

  • Subba Reddy, R Influence of oxygen partial pressure and annealing temperature on the physical properties of nanostructured ZnO thin films prepared by RF magnetron sputtering [Volume 3, Issue 9, 2018, Pages 570-576]

  • Sun, Jinxing A review of recent advances biomedical implants and their application [Volume 3, Issue 8, 2018, Pages 486-493]

  • Suresh, G S Electrochemical glucose biosensor based on biosynthesized silver nanoparticles and polyvinylpyrolidone modified graphite electrode [Volume 3, Issue 5, 2018, Pages 318-323]

  • Suresh, S. Green synthesis of ZnO/SiO2 nanocatalyst with palash leaves extract for treatment of petrochemical wastewater [Volume 3, Issue 1, 2018, Pages 31-35]

  • Swapna, P (Ni, Al) co-doping influence on structural and optical properties of ZnO nanoparticles synthesized via co precipitation method [Volume 3, Issue 9, 2018, Pages 536-539]

  • S. Yadav, Mahender Scope, development, application of magnesium as bioresorable material [Volume 3, Issue 2, 2018, Pages 58-67]

  • S. Yaradoddi, Jayachandra Synthesis and characterization studies of polyaniline nano fibres [Volume 3, Issue 3, 2018, Pages 178-180]

T

  • Tabassum, Rabia Fabrication of biocompatible nanocomposite consisted of zinc oxide nanoparticles based poly (Acrylonitrile-co-Acrylic acid) [Volume 3, Issue 6, 2018, Pages 425-431]

  • Taurins, Gatis Nanostructured carbon materials for hydrogen energetics [Volume 3, Issue 3, 2018, Pages 136-141]

  • Thapliyal, Prashant Investigation of tribo-performance and rheological behavior of lubricants: influence of MoS2 nano-particles [Volume 3, Issue 3, 2018, Pages 164-169]

  • Thomas, Sabu A comparative study on NiO nanocrystal modified graphite and Au electrode matrices as immobilization supports for laccase enzyme in amperometric biosensing for catechol detection [Volume 3, Issue 5, 2018, Pages 304-311]

  • Thyagarajan, K. Enhancement of luminescence properties of Mn2+ substituted dysprosium doped Zinc sulfide nanophosphor [Volume 3, Issue 6, 2018, Pages 419-424]

  • Trejbal, Jan Study on time-dependent surface properties of plasma treated polymer fibers [Volume 3, Issue 6, 2018, Pages 382-385]

U

  • U. Hadkar, Sameer Optical and Thermal studies on CNT doped Liquid Crystal Mixtures [Volume 3, Issue 1, 2018, Pages 41-44]

  • Uthanna, S Influence of oxygen partial pressure and annealing temperature on the physical properties of nanostructured ZnO thin films prepared by RF magnetron sputtering [Volume 3, Issue 9, 2018, Pages 570-576]

V

  • Valencia-Escobar, Andrés Mechanical, microstructural characterization and redesign of a BMX bicycle frame [Volume 3, Issue 6, 2018, Pages 404-407]

  • Valentová, Tereza Study on time-dependent surface properties of plasma treated polymer fibers [Volume 3, Issue 6, 2018, Pages 382-385]

  • Varnagiris, Šarūnas Nanostructured carbon materials for hydrogen energetics [Volume 3, Issue 3, 2018, Pages 136-141]

  • Varshney, Lalit Gamma radiolytic synthesis of poly(2, 3-Epoxy-propylmethacrylate)-stabilized-gold nanoparticles: an efficient catalyst for p-nitrophenol reduction [Volume 3, Issue 4, 2018, Pages 199-205]

  • Venkateswara Reddy, P. Synthesis and Properties of (Mn, Ni) co-doped ZnS nanoparticles [Volume 3, Issue 9, 2018, Pages 566-569]

  • Venkatramana Reddy, S (Ni, Al) co-doping influence on structural and optical properties of ZnO nanoparticles synthesized via co precipitation method [Volume 3, Issue 9, 2018, Pages 536-539]

  • Venkatramana Reddy, S Synthesis and Properties of (Mn, Ni) co-doped ZnS nanoparticles [Volume 3, Issue 9, 2018, Pages 566-569]

  • V. Ganachari, Sharanabasava Synthesis and characterization studies of polyaniline nano fibres [Volume 3, Issue 3, 2018, Pages 178-180]

  • Vieira, Manuela Photodetection of modulated light of white RGB LEDs with a-SiC:H device [Volume 3, Issue 5, 2018, Pages 366-371]

  • Vieira, Manuela Smart vehicle lighting system based on a-SiCH technology [Volume 3, Issue 9, 2018, Pages 544-549]

  • Vieira, Pedro Smart vehicle lighting system based on a-SiCH technology [Volume 3, Issue 9, 2018, Pages 544-549]

  • Vinodkumar, R Charge carrier transport mechanism in combustion synthesized PrAlO3 perovskite [Volume 3, Issue 9, 2018, Pages 562-565]

W

  • Wang, Aiqin Nanoscale dispersion of palygorskite bundles by a facile mechanical/chemical approach [Volume 3, Issue 7, 2018, Pages 447-453]

  • Wang, Fangfang Nanoscale dispersion of palygorskite bundles by a facile mechanical/chemical approach [Volume 3, Issue 7, 2018, Pages 447-453]

  • Wang, Qin Nanoscale dispersion of palygorskite bundles by a facile mechanical/chemical approach [Volume 3, Issue 7, 2018, Pages 447-453]

  • Wang, Wenbo Nanoscale dispersion of palygorskite bundles by a facile mechanical/chemical approach [Volume 3, Issue 7, 2018, Pages 447-453]

  • Wardana, I.N.G. Hybrid effect of the activated carbon and the CuO catalyst on vegetable oil steam reforming [Volume 3, Issue 5, 2018, Pages 340-343]

  • Weingärtner, Roland Fabrication and luminescence properties in Yb –Tb co-doped a-SiCO thin films [Volume 3, Issue 6, 2018, Pages 372-376]

  • W. Mwakikunga, Bonex Structural and optical property changes of zin oxide nanopowders doped with cobalt and indium metals mechano-chemically [Volume 3, Issue 4, 2018, Pages 213-217]

Y

  • Y Tucto, Karem Fabrication and luminescence properties in Yb –Tb co-doped a-SiCO thin films [Volume 3, Issue 6, 2018, Pages 372-376]

Z

  • Zong, Li Nanoscale dispersion of palygorskite bundles by a facile mechanical/chemical approach [Volume 3, Issue 7, 2018, Pages 447-453]

  • Zuleta, Alejandro Mechanical, microstructural characterization and redesign of a BMX bicycle frame [Volume 3, Issue 6, 2018, Pages 404-407]