Silver Jubilee Assembly of Advanced Materials Congress

Editors .

Volume 3, Issue 7 , 2018, Pages 432-434


  Dear Readers,International Association of Advanced Materials (IAAM, www.iaamonline.org) is pleased to announce the  25th  Assembly of Advanced Materials Congress - Advanced Functional Materials Congress (AFMC, www.advancedmaterialsseries.com/afmc19/), to be held during 24 – 27 March 2019 ...  Read More

Review Article
Micro-fibrillar fiber of bicomponent polymer blends: Traditional paradigm with modern approach

Neha Agrawal; Manu Aggarwal; Debmalya Roy; Kingsuk Mukhopadhyay; Arup R. Bhattacharya

Volume 3, Issue 7 , 2018, Pages 433-442


  This review article focuses on the micro-fibrillar fiber origin, its importance and its traditional methods of preparation. Further the different factors which effect the properties of microfiber are being summarized over here. The effect of viscosity ratio, compatibilzer role as constituents are highlighted ...  Read More

Research Article
Impact toughness of closed cell aluminum foam

Sourav Das

Volume 3, Issue 7 , 2018, Pages 443-446


  The impact toughness of closed-cell aluminum foam with various densities was investigated using Charpy impact. The impact load history revealed an elastic region followed by a rapid load drop region. The peak load and impact toughness of aluminum foam increase exponentially with density. The power exponents ...  Read More

Research Article
Nanoscale dispersion of palygorskite bundles by a facile mechanical/chemical approach

Wenbo Wang; Fangfang Wang; Yuru Kang; Li Zong; Qin Wang; Aiqin Wang

Volume 3, Issue 7 , 2018, Pages 447-453


  In this paper, we developed a simple mechanical/chemical process to efficiently disperse palygorskite (PAL) crystal bundles into individual nanorods. The “cavity effect” of high-pressure homogenization process generated many “Miniature bombs” in the interior gap of crystal bundles, ...  Read More

Research Article
On characterizing microscopically the adhesion interphases with humidity aging time for the adhesion between brass-plated steel cords and rubber compounds by Auger Electron Spectroscopy and FE-SEM

Gyung Soo Jeon

Volume 3, Issue 7 , 2018, Pages 454-457


  The effect of humidity aging time of adhesion samples made up of brass-plated steel cord and rubber compound on the adhesion interphase was studied by the depth profiling of Auger electron spectroscopy and FE-SEM.  It was shown that humidity aging time of adhesion samples played major role of formation, ...  Read More

Research Article
Optical constants change in As40Se60 and As50Se50 : A comparative study by FTIR and XPS

Ramakanta Naik; C. Sripan; R. Ganesan

Volume 3, Issue 7 , 2018, Pages 458-463


  In this manuscript, the As40Se60 and As50Se50 samples of 800nm thickness were deposited onto glass substrate by thermal evaporation technique. The as-deposited films were characterized using X-ray diffraction (XRD) and FTIR Spectrophotometer. The prepared samples are amorphous type. The transmission ...  Read More

Research Article
Effect of Dy3+ substitution on microwave behaviour of nanocrystalline Mn-Zn Ferrite

P. Neelima; S. R. Murthy

Volume 3, Issue 7 , 2018, Pages 464-468


  Microwave-hydrothermal (M-H) method had been employed to synthesize a series of Dy3+doped Mn-Zn ferrite Mn0.6Zn0.4Fe2–xDyxO4 (x=0, 0.01, 0.03, 0.05, 0.07, 0.09) nanopowders at 160°C/30 min. The prepared samples have been characterized by Fourier Transform Infrared Spectrometer. The grain size ...  Read More

Research Article
Electrochemical synthesis of copper (II) based metal organic frameworks: Determination of structure by Single X-ray diffraction crystallography and other supportive techniques

Kalawati Saini; Florence Jojeph; Smriti S. Bhatia

Volume 3, Issue 7 , 2018, Pages 469-474


  The copper (II)  extended  metal organic frameworks with oxalic acid ( ox  = oxalate ) [Na 2 ( Cu ( ox) 2 ].H2O and[ (NH4)2 ({ Cu ( ox)2(H2O)2}{ Cu( ox)2 }] .H2O have been synthesized  using electrochemical route at room temperature and applied potential at 12.5 V. Herein copper rod ...  Read More

Research Article
Synthesis and characterisations of boron nitride based propyl triethylenetetramine sulfonic acid catalyst

Arul Murugesan; Robert M Gengan

Volume 3, Issue 7 , 2018, Pages 475-479


  A simple and efficient procedure for the preparation of boron nitride bound N-propyl triethylenetetramine sulfonic acid (BN-BPTETSA) by the reaction of boron nitride bound N-propyl triethylenetetramine (3-TETANP BN) with chlorosulfonic acid in chloroform is described. The boron nitride (BN) ...  Read More

Research Article
Influence of back barrier layer thickness on device performance of AlGaN/GaN MOS-HEMT

Aboo Bakar Khan; Mohini Sharma; Syed Gulraze Anjum; Mohd Jawaid Siddiqui

Volume 3, Issue 7 , 2018, Pages 480-484


  In this work, we have performed the influence of back barrier layer thickness variation on AlGaN/GaN Metal Oxide Semiconductor High Electron Mobility Transistor (MOS-HEMT) device with 0.5 µm Schottky gate length.  The AlGaN back barrier layer presented increases the conduction band with respect ...  Read More