1. Silver Jubilee Assembly of Advanced Materials Congress

Editors .

Volume 3, Issue 7 , August 2018, Pages 432-434

Abstract
  Dear Readers, International Association of Advanced Materials (IAAM, www.iaamonline.org) is pleased to announce the  25th  Assembly of Advanced Materials Congress - Advanced Functional Materials Congress (AFMC, www.advancedmaterialsseries.com/afmc19/), to be held during 24 – 27 March ...  Read More

2. Micro-fibrillar fiber of bicomponent polymer blends: Traditional paradigm with modern approach

Neha Agrawal; Manu Aggarwal; Debmalya Roy; Kingsuk Mukhopadhyay; Arup R. Bhattacharya

Volume 3, Issue 7 , August 2018, Pages 433-442

Abstract
  This review article focuses on the micro-fibrillar fiber origin, its importance and its traditional methods of preparation. Further the different factors which effect the properties of microfiber are being summarized over here. The effect of viscosity ratio, compatibilzer role as constituents are highlighted ...  Read More

3. Impact toughness of closed cell aluminum foam

Sourav Das

Volume 3, Issue 7 , August 2018, Pages 443-446

Abstract
  The impact toughness of closed-cell aluminum foam with various densities was investigated using Charpy impact. The impact load history revealed an elastic region followed by a rapid load drop region. The peak load and impact toughness of aluminum foam increase exponentially with density. The power exponents ...  Read More

4. Nanoscale dispersion of palygorskite bundles by a facile mechanical/chemical approach

Wenbo Wang; Fangfang Wang; Yuru Kang; Li Zong; Qin Wang; Aiqin Wang

Volume 3, Issue 7 , August 2018, Pages 447-453

Abstract
  In this paper, we developed a simple mechanical/chemical process to efficiently disperse palygorskite (PAL) crystal bundles into individual nanorods. The “cavity effect” of high-pressure homogenization process generated many “Miniature bombs” in the interior gap of crystal bundles, ...  Read More

5. On characterizing microscopically the adhesion interphases with humidity aging time for the adhesion between brass-plated steel cords and rubber compounds by Auger Electron Spectroscopy and FE-SEM

Gyung Soo Jeon

Volume 3, Issue 7 , August 2018, Pages 454-457

Abstract
  The effect of humidity aging time of adhesion samples made up of brass-plated steel cord and rubber compound on the adhesion interphase was studied by the depth profiling of Auger electron spectroscopy and FE-SEM.  It was shown that humidity aging time of adhesion samples played major role of formation, ...  Read More

6. Optical constants change in As40Se60 and As50Se50 : A comparative study by FTIR and XPS

Ramakanta Naik; C. Sripan; R. Ganesan

Volume 3, Issue 7 , August 2018, Pages 458-463

Abstract
  In this manuscript, the As40Se60 and As50Se50 samples of 800nm thickness were deposited onto glass substrate by thermal evaporation technique. The as-deposited films were characterized using X-ray diffraction (XRD) and FTIR Spectrophotometer. The prepared samples are amorphous type. The transmission ...  Read More

7. Effect of Dy3+ substitution on microwave behaviour of nanocrystalline Mn-Zn Ferrite

P. Neelima; S. R. Murthy

Volume 3, Issue 7 , August 2018, Pages 464-468

Abstract
  Microwave-hydrothermal (M-H) method had been employed to synthesize a series of Dy3+doped Mn-Zn ferrite Mn0.6Zn0.4Fe2–xDyxO4 (x=0, 0.01, 0.03, 0.05, 0.07, 0.09) nanopowders at 160°C/30 min. The prepared samples have been characterized by Fourier Transform Infrared Spectrometer. The grain size ...  Read More

8. Electrochemical synthesis of copper (II) based metal organic frameworks: Determination of structure by Single X-ray diffraction crystallography and other supportive techniques

Kalawati Saini; Florence Jojeph; Smriti S. Bhatia

Volume 3, Issue 7 , August 2018, Pages 469-474

Abstract
  The copper (II)  extended  metal organic frameworks with oxalic acid ( ox  = oxalate ) [Na 2 ( Cu ( ox) 2 ].H2O and [ (NH4)2 ({ Cu ( ox)2(H2O)2}{ Cu( ox)2 }] .H2O have been synthesized  using electrochemical route at room temperature and applied potential at 12.5 V. Herein copper ...  Read More

9. Synthesis and characterisations of boron nitride based propyl triethylenetetramine sulfonic acid catalyst

Arul Murugesan; Robert M Gengan

Volume 3, Issue 7 , August 2018, Pages 475-479

Abstract
  A simple and efficient procedure for the preparation of boron nitride bound N-propyl triethylenetetramine sulfonic acid (BN-BPTETSA) by the reaction of boron nitride bound N-propyl triethylenetetramine (3-TETANP BN) with chlorosulfonic acid in chloroform is described. The boron nitride (BN) ...  Read More

10. Influence of back barrier layer thickness on device performance of AlGaN/GaN MOS-HEMT

Aboo Bakar Khan; Mohini Sharma; Syed Gulraze Anjum; Mohd Jawaid Siddiqui

Volume 3, Issue 7 , August 2018, Pages 480-484

Abstract
  In this work, we have performed the influence of back barrier layer thickness variation on AlGaN/GaN Metal Oxide Semiconductor High Electron Mobility Transistor (MOS-HEMT) device with 0.5 µm Schottky gate length.  The AlGaN back barrier layer presented increases the conduction band with respect ...  Read More