Sandip Maiti; Sumanta Kumar Karan; Jin Kon Kim; Bhanu Bhusan Khatua
Abstract
Today, we stand at the edge of exploring carbon nanotube (CNT) and graphene based polymer composites and supercapacitors as next generation multifunctional materials. Supercapacitor materials have been alternative energy source in modern electronics era. Due to their excellent electrical, mechanical ...
Read More
Today, we stand at the edge of exploring carbon nanotube (CNT) and graphene based polymer composites and supercapacitors as next generation multifunctional materials. Supercapacitor materials have been alternative energy source in modern electronics era. Due to their excellent electrical, mechanical and thermal properties, CNTs, graphene and their derivatives have been most promising nanofillers in different fieldsof applications. Inthis review, we have focused electrical conductivity of the polymer composites as well as supercapacitor behavior of composites based on CNTs, graphene and their derivatives. To enhance the electrical and supercapacitor properties of the composites, nanofillers are functionalized or chemically modified through different techniques. Here, we have discussed the structure, preparation,electrical and supercapacitor properties of different composites based on CNTs, graphene and their derivatives along with detailed reported scientific literature.Copyright © 2018VBRI Press
Sangeeta Semwal; Sarab P. Singh; Vasant D. Vankar
Abstract
In present work, hybrid structures of Si Nanocrystals (Si-ncs) and Carbon Nanotubes (CNTs) with bead-like architecture have been synthesized by exposing pristine CNTs to silane (SiH4) at 200 ºC. The exposed CNTs were annealed in Ar ambient at 500ºC in a catalytic chemical vapor deposition chamber. ...
Read More
In present work, hybrid structures of Si Nanocrystals (Si-ncs) and Carbon Nanotubes (CNTs) with bead-like architecture have been synthesized by exposing pristine CNTs to silane (SiH4) at 200 ºC. The exposed CNTs were annealed in Ar ambient at 500ºC in a catalytic chemical vapor deposition chamber. High-resolution transmission electron microscopy (HRTEM) elucidated that the bead-like architecture has well-defined crystalline nature. X-ray photoelectron spectroscopy (XPS) was used to study the nature of chemical bonding and structural functionalization/defects caused by silane exposure and annealing on the nanotube surface. XPS results indicated in-diffusion of Si in the CNT cavity as well reduction in oxygen content on the top surface of the CNTs. X-ray diffractometry was used to further confirm the formation of the crystalline hybrid structures. From the present work it is inferred that a controlled synthesis of hybrid structures (CNT-Si ncs) with bead-like architecture can be achieved by a simple CVD method for various applications
Mahima Khandelwal; Anil Kumar; Richa Baronia; Shraddha Tiwari; Avanish K. Srivastava; Surinder P. Singh; Sunil K. Singhal
Abstract
In the present work we report a facile method for the synthesis of Pt nanoparticles supported reduced graphene oxide (rGO) and multi-walled carbon nanotubes (MWCNTs) nanocomposite by an in-situ chemical reduction. The incorporation of MWCNTs to rGO leads to decrease in agglomeration between rGO sheets ...
Read More
In the present work we report a facile method for the synthesis of Pt nanoparticles supported reduced graphene oxide (rGO) and multi-walled carbon nanotubes (MWCNTs) nanocomposite by an in-situ chemical reduction. The incorporation of MWCNTs to rGO leads to decrease in agglomeration between rGO sheets due to π – π interactions and higher loading of Pt nanoparticles. In this process, a mixture of exfoliated graphene oxide, CNTs and chloroplatinic acid was treated with a mixture of hydrazine hydrate and ammonium hydroxide at 95° C in an oil bath for 1 h. Pt nanoparticles of 4-6 nm size were homogeneously dispersed on rGO-CNTs nanocomposite as revealed by TEM analysis. Cyclic voltammetry measurements depict an anodic current density of 11.74 mA/cm2 that could be obtained using Pt/rGO-CNTs catalyst and 6.2 mA/cm2 using Pt/rGO catalyst during methanol oxidation, indicating that the catalytic activity of Pt/rGO-CNTs catalyst is almost 2 times higher than that of Pt/rGO catalyst. The electrochemical stability of Pt/rGO-CNTs catalyst was also found to be much higher as compared with that of Pt/rGO catalyst. Thus, Pt/rGO-CNTs catalyst has the potential to be used in the preparation of a promising anode material for direct methanol fuel cell. Copyright © 2016 VBRI Press